Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (62), Antenna / Transponder (7), Anti-roll bar (252), Axle (82), Ball joint (58), battery (73), Battery holder (25), Bearing (123), Belt (85), Bevel gear (18), Body mount parts (18), Body post (26), Brake (41), Bulkhead (154), Bumper (69), C-Hub (85), Chassis (255), Clip (36), Clutch (139), CVD (53), Damper (2), deck (86), Diff (172), Drive shaft (166), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (11), Exhaust (10), Flywheel (23), Fuel Tank / tube (7), Hex (139), Impact (1), Layshaft (21), M3 (85), M4 (24), Motor Holder (4), O-ring (47), Pin (174), Pinion gear (100), Pivot Ball (48), Pivot Pin (49), Pulley (62), Radio plate / RX box (11), Rear hub (11), Rear Wing (40), Servo (181), Servo Horn (42), Servo horn / mount (7), Servo saver (59), shaft (289), Shim (117), Shock parts (69), Shock tower (104), Soft (46), Spring (495), Spur gear (66), Steering block (98), Steering plate (33), Suspension arm (188), Suspension holder (71), Turnbuckle (60), Upper/Top Deck (18), Upright (36), weight (55), Wheel hub (39)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR371020 - X1'19 GRAPHITE CHASSIS & TOP DECK 2.5MM - ADJ. WHEELBASE
X1'19 GRAPHITE CHASSIS & TOP DECK 2.5MM - ADJ. WHEELBASE XR371020
€138.64 (RRP inc. VAT)
#XR371059 - X1'23 GRAPHITE ARM MOUNT PLATE 2.5MM - NARROW TRACK-WIDTH
X1'23 GRAPHITE ARM MOUNT PLATE 2.5MM - NARROW TRACK-WIDTH XR371059
€18.22 (RRP inc. VAT)
#XR371080 - X1'20 GRAPHITE REAR BRACE 3.5MM
X1'20 GRAPHITE REAR BRACE 3.5MM XR371080
€35.10 (RRP inc. VAT)
#XR371109 - X12'18 GRAPHITE CHASSIS 2.5MM
X12'18 GRAPHITE CHASSIS 2.5MM XR371109
€99.94 (RRP inc. VAT)
#XR371111 - X12'19 GRAPHITE CHASSIS 2.5MM
X12'19 GRAPHITE CHASSIS 2.5MM XR371111
€99.94 (RRP inc. VAT)
#XR371156 - X10'18 ALU 2.0MM REAR POD LOWER PLATE
X10'18 ALU 2.0MM REAR POD LOWER PLATE XR371156
€50.04 (RRP inc. VAT)
#XR371160 - X12'21 GRAPHITE 2.5MM REAR POD LOWER PLATE
X12'21 GRAPHITE 2.5MM REAR POD LOWER PLATE XR371160
€42.77 (RRP inc. VAT)
#XR371183 - X12'20 GRAPHITE POD LINK PLATE 2.5MM (2)
X12'20 GRAPHITE POD LINK PLATE 2.5MM (2) XR371183
€13.63 (RRP inc. VAT)
#XR371185 - X1'20/21/23/24 GRAPHITE POD LINK PLATE 2.2MM (2)
X1'20/21/23/24 GRAPHITE POD LINK PLATE 2.2MM (2) XR371185
€13.63 (RRP inc. VAT)
#XR372135 - X1'21 GRAPHITE UPPER SUSPENSION ARM 2.5MM
X1'21 GRAPHITE UPPER SUSPENSION ARM 2.5MM XR372135
€19.24 (RRP inc. VAT)
#XR372912 - X1'24 ALU REAR BULKHEAD - MOTOR - RIGHT
X1'24 ALU REAR BULKHEAD - MOTOR - RIGHT XR372912
€40.07 (RRP inc. VAT)
#XR372922 - X1'24 ALU REAR BULKHEAD - LEFT
X1'24 ALU REAR BULKHEAD - LEFT XR372922
€40.07 (RRP inc. VAT)
#XR373051 - X1'20/21/23 GRAPHITE REAR WING MOUNT 2.5MM
X1'20/21/23 GRAPHITE REAR WING MOUNT 2.5MM XR373051
€18.07 (RRP inc. VAT)
#XR373550 - X12 REAR POD UPPER PLATE - GRAPHITE 2.5MM
X12 REAR POD UPPER PLATE - GRAPHITE 2.5MM XR373550
€17.04 (RRP inc. VAT)
#XR373555 - X12'22 GRAPHITE REAR POD UPPER PLATE 2.5MM
X12'22 GRAPHITE REAR POD UPPER PLATE 2.5MM XR373555
€15.77 (RRP inc. VAT)
#XR376264 - X1'23 ALU FRONT TOP DECK MOUNT - SWISS 7075 T6
X1'23 ALU FRONT TOP DECK MOUNT - SWISS 7075 T6 XR376264
€36.43 (RRP inc. VAT)
#XR376322 - X10'22 GRAPHITE SIDE BRACE 2.5MM (2)
X10'22 GRAPHITE SIDE BRACE 2.5MM (2) XR376322
€30.24 (RRP inc. VAT)
#XR378050-K - ALU SHOCK BODY CAP - UPPER - BLACK
ALU SHOCK BODY CAP - UPPER - BLACK XR378050-K
€6.49 (RRP inc. VAT)
#XR378070-K - ALU SHOCK SPRING COLLAR - BLACK
ALU SHOCK SPRING COLLAR - BLACK XR378070-K
€10.06 (RRP inc. VAT)
#XR389178 - METAL GEAR SET FOR XRAY XMS01MG
METAL GEAR SET FOR XRAY XMS01MG XR389178
€21.84 (RRP inc. VAT)
#XR389179 - GEAR SET FOR XRAY XMS01
GEAR SET FOR XRAY XMS01 XR389179
€12.32 (RRP inc. VAT)
#XR302083 - T4'19 ULP SHOCK TOWER FRONT 3.0MM GRAPHITE
50%
OFF
T4'19 ULP SHOCK TOWER FRONT 3.0MM GRAPHITE XR302083
€24.48 (RRP inc.VAT)
€12.24 (RRP inc. VAT)
#XR302760-O - T4 ALU LOWER ADJ. BULKHEAD - FRONT R / REAR L - ORANGE --- Replaced with #302762-O
T4 ALU LOWER ADJ. BULKHEAD - FRONT R / REAR L - ORANGE --- Replaced with #302762-O XR302760-O
€27.58 (RRP inc. VAT)
#XR302814 - T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.4 MM
T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.4 MM XR302814
€9.94 (RRP inc. VAT)
#XR303496 - T4 ANTI-ROLL BAR REAR 1.6 MM
T4 ANTI-ROLL BAR REAR 1.6 MM XR303496
€9.94 (RRP inc. VAT)
#XR303722-O - ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - LOW
50%
OFF
ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - LOW XR303722-O
€25.88 (RRP inc.VAT)
€12.95 (RRP inc. VAT)
#XR305343 - X4 DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEELâ„¢
X4 DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEEL™ XR305343
€24.79 (RRP inc. VAT)
#XR306204 - ALU SERVO MOUNT - BLACK
ALU SERVO MOUNT - BLACK XR306204
€34.66 (RRP inc. VAT)
#XR306237 - X4 GRAPHITE FLOATING SERVO HOLDER 3.0MM
X4 GRAPHITE FLOATING SERVO HOLDER 3.0MM XR306237
€13.70 (RRP inc. VAT)
#XR323081-H - COMPOSITE SHOCK TOWER REAR - HARD
COMPOSITE SHOCK TOWER REAR - HARD XR323081-H
€14.77 (RRP inc. VAT)
#XR325318 - XT2 REAR DRIVE SHAFT 95MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
XT2 REAR DRIVE SHAFT 95MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325318
€24.36 (RRP inc. VAT)
#XR332131 - COMPOSITE SUSPENSION ARM FRONT UPPER - HARD
COMPOSITE SUSPENSION ARM FRONT UPPER - HARD XR332131
€8.65 (RRP inc. VAT)
#XR333015 - ALU LOWER BULKHEAD REAR - SWISS 7075 T6 - RIGHT
ALU LOWER BULKHEAD REAR - SWISS 7075 T6 - RIGHT XR333015
€45.53 (RRP inc. VAT)
#XR333063 - GRAPHITE ROLL-CENTER BRIDGE 4.0MM
GRAPHITE ROLL-CENTER BRIDGE 4.0MM XR333063
€18.72 (RRP inc. VAT)
#XR333712 - ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - FRONT - RF
ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - FRONT - RF XR333712
€32.47 (RRP inc. VAT)
#XR333721 - ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR
ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR XR333721
€40.07 (RRP inc. VAT)
#XR341360-M - COMPOSITE REAR BODY HOLDER SCREW - MEDIUM (2)
COMPOSITE REAR BODY HOLDER SCREW - MEDIUM (2) XR341360-M
€7.13 (RRP inc. VAT)
#XR341380-M - COMPOSITE REAR BODY CENTERING PLATE - MEDIUM
COMPOSITE REAR BODY CENTERING PLATE - MEDIUM XR341380-M
€7.13 (RRP inc. VAT)
#XR343073 - BELT TENSIONER SET - STEEL
BELT TENSIONER SET - STEEL XR343073
€28.52 (RRP inc. VAT)
#XR343084 - GRAPHITE SHOCK TOWER REAR
GRAPHITE SHOCK TOWER REAR XR343084
€19.40 (RRP inc. VAT)
#XR343311-G - COMPOSITE UPRIGHT REAR FOR AERO DISC - GRAPHITE
COMPOSITE UPRIGHT REAR FOR AERO DISC - GRAPHITE XR343311-G
€18.12 (RRP inc. VAT)
#XR345732-K - ALU MIDDLE SHAFT LOCATING COLLAR - SHORT - BLACK
ALU MIDDLE SHAFT LOCATING COLLAR - SHORT - BLACK XR345732-K
€8.98 (RRP inc. VAT)
#XR345801-G - LOW FRICTION COMPOSITE BELT PULLEY SET - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY SET - GRAPHITE XR345801-G
€43.07 (RRP inc. VAT)
#XR345838-G - LOW FRICTION COMPOSITE SIDE BELT PULLEY 18T o8 - REAR - GRAPHITE
LOW FRICTION COMPOSITE SIDE BELT PULLEY 18T o8 - REAR - GRAPHITE XR345838-G
€9.59 (RRP inc. VAT)
#XR351350 - COMPOSITE UPPER PLATE WITH TWO BRACE POSITIONS
COMPOSITE UPPER PLATE WITH TWO BRACE POSITIONS XR351350
€8.10 (RRP inc. VAT)
#XR352008 - GT COMPOSITE DIFF BULKHEAD BLOCK SET WITH EXTRA AIR COOLING
GT COMPOSITE DIFF BULKHEAD BLOCK SET WITH EXTRA AIR COOLING XR352008
€46.58 (RRP inc. VAT)
#XR353068 - XT8.2 ALU REAR SHOCK TOWER - CNC MACHINED 7075 T6 (4MM)
XT8.2 ALU REAR SHOCK TOWER - CNC MACHINED 7075 T6 (4MM) XR353068
€74.99 (RRP inc. VAT)
#XR353394 - GRAPHITE EXTENSION FOR ALU REAR UPRIGHT (1+1)
GRAPHITE EXTENSION FOR ALU REAR UPRIGHT (1+1) XR353394
€17.95 (RRP inc. VAT)
#XR353524 - XB8 COMPOSITE REAR WING HOLDER
XB8 COMPOSITE REAR WING HOLDER XR353524
€15.97 (RRP inc. VAT)
#XR354011-G - CENTER DIFF MOUNTING PLATE SET - HIGHER - GRAPHITE
CENTER DIFF MOUNTING PLATE SET - HIGHER - GRAPHITE XR354011-G
€13.02 (RRP inc. VAT)
#XR354211 - GTXE CENTRAL SOLID SHAFT - HUDY SPRING STEELâ„¢
GTXE CENTRAL SOLID SHAFT - HUDY SPRING STEEL™ XR354211
€36.02 (RRP inc. VAT)
#XR358035 - SHOCK PISTON SET - HARD (2)
SHOCK PISTON SET - HARD (2) XR358035
€4.32 (RRP inc. VAT)
#XR358050 - ALU SHOCK CAP NUT (2)
ALU SHOCK CAP NUT (2) XR358050
€10.46 (RRP inc. VAT)
#XR358106 - GTX8 SHOCK ABSORBERS - V2 (2)
GTX8 SHOCK ABSORBERS - V2 (2) XR358106
€99.00 (RRP inc. VAT)
#XR358269 - XT8 REAR BIG BORE SHOCK SHAFT (2)
XT8 REAR BIG BORE SHOCK SHAFT (2) XR358269
€18.47 (RRP inc. VAT)
#XR361286-H - COMPOSITE CHASSIS BRACE FRONT - HARD
COMPOSITE CHASSIS BRACE FRONT - HARD XR361286-H
€9.80 (RRP inc. VAT)
#XR361293 - COMPOSITE CHASSIS WIRE COVER
COMPOSITE CHASSIS WIRE COVER XR361293
€4.86 (RRP inc. VAT)
#XR363083 - XT4 GRAPHITE SHOCK TOWER REAR 3.5MM
XT4 GRAPHITE SHOCK TOWER REAR 3.5MM XR363083
€42.73 (RRP inc. VAT)
#XR363311 - ALU REAR LOWER SUSP. HOLDER +2 - FRONT - 7075 T6 (5MM)
ALU REAR LOWER SUSP. HOLDER +2 - FRONT - 7075 T6 (5MM) XR363311
€25.88 (RRP inc. VAT)
#XR363314 - ALU LOWER SUSP. HOLDER 3° REAR-FRONT - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER 3° REAR-FRONT - NARROW - 7075 T6 XR363314
€34.66 (RRP inc. VAT)
#XR363315 - ALU LOWER SUSP. HOLDER 1° REAR-FRONT - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER 1° REAR-FRONT - NARROW - 7075 T6 XR363315
€34.66 (RRP inc. VAT)
#XR363353-G - COMPOSITE UPRIGHT REAR - GRAPHITE
COMPOSITE UPRIGHT REAR - GRAPHITE XR363353-G
€11.53 (RRP inc. VAT)
#XR364121 - ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - 7075 T6 HARD COATED
ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - 7075 T6 HARD COATED XR364121
€18.85 (RRP inc. VAT)
#XR364126 - ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6
ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6 XR364126
€20.16 (RRP inc. VAT)
#XR364192 - ALU NUT FOR ONE-WAY SLIPPER CLUTCH
ALU NUT FOR ONE-WAY SLIPPER CLUTCH XR364192
€9.32 (RRP inc. VAT)
#XR364912-G - COMPOSITE GEAR DIFFERENTIAL CASE - LARGE VOLUME - GRAPHITE
COMPOSITE GEAR DIFFERENTIAL CASE - LARGE VOLUME - GRAPHITE XR364912-G
€13.08 (RRP inc. VAT)
#XR366050 - COMPOSITE RADIO PLATE - V2
COMPOSITE RADIO PLATE - V2 XR366050
€8.39 (RRP inc. VAT)
#XR366161 - SET OF O-RINGS (6x2, 6x3, 6x4, 6x5MM)
SET OF O-RINGS (6x2, 6x3, 6x4, 6x5MM) XR366161
€8.59 (RRP inc. VAT)
#XR368041 - STEEL SHOCK BUSHING FOR ALU CAP (2)
STEEL SHOCK BUSHING FOR ALU CAP (2) XR368041
€7.34 (RRP inc. VAT)
#XR369713 - BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4C - LIGHT
BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4C - LIGHT XR369713
€32.86 (RRP inc. VAT)
#XR369714 - BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4D
BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4D XR369714
€32.86 (RRP inc. VAT)
#XR371022 - X1'20 GRAPHITE CHASSIS 2.5MM - HARD
X1'20 GRAPHITE CHASSIS 2.5MM - HARD XR371022
€97.52 (RRP inc. VAT)
#XR371066 - X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - NARROW TRACK-WIDTH - 2.5MM
X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - NARROW TRACK-WIDTH - 2.5MM XR371066
€20.03 (RRP inc. VAT)
#XR371067 - X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM
X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM XR371067
€20.03 (RRP inc. VAT)
#XR371113 - X12'20 GRAPHITE CHASSIS 2.5MM
X12'20 GRAPHITE CHASSIS 2.5MM XR371113
€99.94 (RRP inc. VAT)
#XR371157 - X1'20 GRAPHITE REAR POD LOWER PLATE 2.5MM
X1'20 GRAPHITE REAR POD LOWER PLATE 2.5MM XR371157
€40.07 (RRP inc. VAT)
#XR371158 - X1'20 ALU REAR POD LOWER PLATE 2.0MM - 7075 T6
X1'20 ALU REAR POD LOWER PLATE 2.0MM - 7075 T6 XR371158
€40.07 (RRP inc. VAT)
#XR371182 - X1'18 GRAPHITE POD LINK PLATE 2.5MM (2)
X1'18 GRAPHITE POD LINK PLATE 2.5MM (2) XR371182
€13.63 (RRP inc. VAT)
#XR372090 - X12'21 FRONT BRACE - GRAPHITE 2.0MM
X12'21 FRONT BRACE - GRAPHITE 2.0MM XR372090
€10.43 (RRP inc. VAT)
#XR372126 - X12 GRAPHITE LOWER SUSPENSION ARM PLATE 2.5MM - WIDER +2MM
X12 GRAPHITE LOWER SUSPENSION ARM PLATE 2.5MM - WIDER +2MM XR372126
€34.44 (RRP inc. VAT)
#XR372410 - X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - ORANGE
X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - ORANGE XR372410
€15.47 (RRP inc. VAT)
#XR372492 - ANTI-ROLL BAR - FRONT 1.2 MM
ANTI-ROLL BAR - FRONT 1.2 MM XR372492
€9.94 (RRP inc. VAT)
#XR372550-K - X1 ALU STEERING PIVOT SHAFT - BLACK
X1 ALU STEERING PIVOT SHAFT - BLACK XR372550-K
€8.32 (RRP inc. VAT)
#XR373016 - X12'19 ALU REAR BULKHEAD - MOTOR (RIGHT)
X12'19 ALU REAR BULKHEAD - MOTOR (RIGHT) XR373016
€40.07 (RRP inc. VAT)
#XR375392 - ALU 7075 HEX SCREW M3x10 (6)
ALU 7075 HEX SCREW M3x10 (6) XR375392
€9.29 (RRP inc. VAT)
#XR376232 - X1'19 GRAPHITE TOP DECK 2.5MM
X1'19 GRAPHITE TOP DECK 2.5MM XR376232
€18.60 (RRP inc. VAT)
#XR376261-O - X12'20 ALU SERVO MOUNT - ORANGE (2)
X12'20 ALU SERVO MOUNT - ORANGE (2) XR376261-O
€18.34 (RRP inc. VAT)
#XR376263 - X12'21 ALU SERVO MOUNT - BLACK (2)
X12'21 ALU SERVO MOUNT - BLACK (2) XR376263
€17.82 (RRP inc. VAT)
#XR376366-O - ALU MOUNT 6.0MM - ORANGE (2)
ALU MOUNT 6.0MM - ORANGE (2) XR376366-O
€9.88 (RRP inc. VAT)
#XR378073-K - X1 ALU SHOCK ADAPTER - BLACK
X1 ALU SHOCK ADAPTER - BLACK XR378073-K
€10.21 (RRP inc. VAT)
#XR378073-O - X1 ALU SHOCK ADAPTER - ORANGE
X1 ALU SHOCK ADAPTER - ORANGE XR378073-O
€11.26 (RRP inc. VAT)
#XR332039 - ALU UPPER CLAMP FRONT - MULTI-FLEX - BLACK - 7075 T6 - (L+R)
ALU UPPER CLAMP FRONT - MULTI-FLEX - BLACK - 7075 T6 - (L+R) XR332039
€52.01 (RRP inc. VAT)
#XR332732 - ALU UPPER ARM HOLDER - RIGHT - BLACK - SWISS 7075 T6 - SET
ALU UPPER ARM HOLDER -  RIGHT - BLACK - SWISS 7075 T6 - SET XR332732
€39.77 (RRP inc. VAT)
#XR332742 - ALU UPPER ARM HOLDER - LEFT - BLACK - SWISS 7075 T6 - SET
ALU UPPER ARM HOLDER -  LEFT - BLACK - SWISS 7075 T6 - SET XR332742
€39.77 (RRP inc. VAT)
#XR333054 - GRAPHITE REAR BULKHEAD BRACE 2.5MM
GRAPHITE REAR BULKHEAD BRACE 2.5MM XR333054
€15.71 (RRP inc. VAT)
#XR333480 - ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 2.0 MM
ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 2.0 MM XR333480
€10.22 (RRP inc. VAT)
#XR345820-G - LOW FRICTION COMPOSITE 2-SPEED BELT PULLEY 20T - CENTER - GRAPHITE
LOW FRICTION COMPOSITE 2-SPEED BELT PULLEY 20T - CENTER - GRAPHITE XR345820-G
€8.71 (RRP inc. VAT)
#XR352276 - ALU CASTER BLOCK 16° RIGHT - SWISS 7075 T6
 XR352276
€67.39 (RRP inc. VAT)
#XR353081 - GTX'22 COMPOSITE REAR BRACE
GTX'22 COMPOSITE REAR BRACE XR353081
€16.00 (RRP inc. VAT)
#XR354033 - GT COMPOSITE 2-SPEED HOLDER PLATE (2)
GT COMPOSITE 2-SPEED HOLDER PLATE (2) XR354033
€7.34 (RRP inc. VAT)
#XR355824 - ALU PINION GEAR - HARD COATED 24T
ALU PINION GEAR - HARD COATED 24T XR355824
€25.42 (RRP inc. VAT)
#XR358010 - COMPOSITE FRAME SHOCK PARTS
COMPOSITE FRAME SHOCK PARTS XR358010
€7.34 (RRP inc. VAT)
#XR358229 - XT8 ALU REAR BIG BORE SHOCK BODY (2)
XT8 ALU REAR BIG BORE SHOCK BODY (2) XR358229
€27.28 (RRP inc. VAT)
#XR358230 - XT8 ALU REAR SHOCK BODY - SWISS 7075 T6 (2)
XT8 ALU REAR SHOCK BODY - SWISS 7075 T6 (2) XR358230
€40.07 (RRP inc. VAT)
#XR361272-H - COMPOSITE CHASSIS SIDE GUARDS L+R - HARD
COMPOSITE CHASSIS SIDE GUARDS L+R - HARD XR361272-H
€20.57 (RRP inc. VAT)
#XR362084 - XT4 GRAPHITE SHOCK TOWER FRONT 3.5MM
XT4 GRAPHITE SHOCK TOWER FRONT 3.5MM XR362084
€42.73 (RRP inc. VAT)
#XR362190 - GRAPHITE FRONT LOWER ARM PLATE 1.6MM (L+R)
GRAPHITE FRONT LOWER ARM PLATE 1.6MM (L+R) XR362190
€25.03 (RRP inc. VAT)
#XR362312 - ALU LOWER SUSP. HOLDER FRONT-FRONT - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER FRONT-FRONT - NARROW - 7075 T6 XR362312
€34.66 (RRP inc. VAT)
#XR362322 - ALU LOWER SUSP. HOLDER FRONT-REAR - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER FRONT-REAR - NARROW - 7075 T6 XR362322
€34.66 (RRP inc. VAT)
#XR363310 - ALU REAR LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM)
ALU REAR LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM) XR363310
€23.77 (RRP inc. VAT)
#XR366054 - COMPOSITE RADIO PLATE
COMPOSITE RADIO PLATE XR366054
€7.76 (RRP inc. VAT)
#XR368042 - COMPOSITE SHOCK BUSHING & SHIM FOR ALU CAP (2+2)
COMPOSITE SHOCK BUSHING & SHIM FOR ALU CAP (2+2) XR368042
€6.30 (RRP inc. VAT)
#XR368049 - ALU SHOCK ADJUSTABLE NUT - BIG BORE (2)
ALU SHOCK ADJUSTABLE NUT - BIG BORE (2) XR368049
€12.32 (RRP inc. VAT)
#XR369300 - XB4 MOUNTING HARDWARE PACKAGE - SET
XB4 MOUNTING HARDWARE PACKAGE - SET XR369300
€25.88 (RRP inc. VAT)
#XR371184 - ALU POD LINK GRAPHITE PLATE HOLDER - ORANGE
ALU POD LINK GRAPHITE PLATE HOLDER - ORANGE XR371184
€15.20 (RRP inc. VAT)
#XR372089 - X1'20/X1'21 GRAPHITE FRONT ARM BRACE 2.5MM
X1'20/X1'21 GRAPHITE FRONT ARM BRACE 2.5MM XR372089
€10.75 (RRP inc. VAT)
#XR372615-K - ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 - BLACK (2)
ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 - BLACK (2) XR372615-K
€14.05 (RRP inc. VAT)
#XR373017 - X1'20 ALU REAR BULKHEAD - MOTOR (RIGHT)
X1'20 ALU REAR BULKHEAD - MOTOR (RIGHT) XR373017
€40.07 (RRP inc. VAT)
#XR373025 - X1'19 ALU REAR BULKHEAD - LEFT
X1'19 ALU REAR BULKHEAD - LEFT XR373025
€40.07 (RRP inc. VAT)
#XR373027 - X1'20 ALU REAR BULKHEAD - LEFT
X1'20 ALU REAR BULKHEAD - LEFT XR373027
€40.07 (RRP inc. VAT)
#XR373075 - ALU REAR BRACE MOUNT 10.5MM - BLACK (2)
ALU REAR BRACE MOUNT 10.5MM - BLACK (2) XR373075
€10.31 (RRP inc. VAT)
#XR373243 - BALL END 6.0MM WITH THREAD 4MM (2)
BALL END 6.0MM WITH THREAD 4MM (2) XR373243
€9.29 (RRP inc. VAT)
#XR376262-O - X1'20/X1'21 ALU FRONT STAND - ORANGE
X1'20/X1'21 ALU FRONT STAND - ORANGE XR376262-O
€26.78 (RRP inc. VAT)
#XR376361-K - ALU MOUNT 26.5MM - BLACK (2)
ALU MOUNT 26.5MM - BLACK (2) XR376361-K
€10.10 (RRP inc. VAT)
#XR376363-K - ALU MOUNT 28.5MM - BLACK (2)
ALU MOUNT 28.5MM - BLACK (2) XR376363-K
€13.25 (RRP inc. VAT)
#XR378030-K - ALU SHOCK BODY CAP - LOWER - BLACK
ALU SHOCK BODY CAP - LOWER - BLACK XR378030-K
€6.49 (RRP inc. VAT)
#XR303433 - ALU ANTI-ROLL BAR BUSHING - 6MM (2)
ALU ANTI-ROLL BAR BUSHING - 6MM (2) XR303433
€15.06 (RRP inc. VAT)
#XR308352-K - ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2)
ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2) XR308352-K
€11.02 (RRP inc. VAT)
#XR332711 - ALU LOWER 2-PIECE FRONT SUSPENSION HOLDER - BLACK (1)
ALU LOWER 2-PIECE FRONT SUSPENSION HOLDER - BLACK (1) XR332711
€15.04 (RRP inc. VAT)
#XR341331-M - COMPOSITE REAR BODY HOLDER - HIGHER - MEDIUM
COMPOSITE REAR BODY HOLDER - HIGHER - MEDIUM XR341331-M
€17.94 (RRP inc. VAT)
#XR345713 - RX8E FRONT MIDDLE SHAFT - LIGHTWEIGHT - HUDY SPRING STEELâ„¢
RX8E FRONT MIDDLE SHAFT - LIGHTWEIGHT - HUDY SPRING STEEL™ XR345713
€23.54 (RRP inc. VAT)
#XR358124 - XB8 ALU FRONT SHOCK BODY - SWISS 7075 T6 - V2 (2)
XB8 ALU FRONT SHOCK BODY - SWISS 7075 T6 - V2 (2) XR358124
€40.07 (RRP inc. VAT)
#XR358270 - XT8 REAR SHOCK SHAFT (2)
XT8 REAR SHOCK SHAFT (2) XR358270
€21.37 (RRP inc. VAT)
#XR371065 - X1'19 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM
X1'19 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM XR371065
€20.03 (RRP inc. VAT)
#XR371076 - X10'18 REAR BRACE - GRAPHITE 2.5MM
X10'18 REAR BRACE - GRAPHITE 2.5MM XR371076
€24.16 (RRP inc. VAT)
#XR371094 - X1'17 PLATE FOR MOUNTS - 2.5MM GRAPHITE
X1'17 PLATE FOR MOUNTS - 2.5MM GRAPHITE XR371094
€13.63 (RRP inc. VAT)
#XR372088 - X12'20 FRONT BRACE - GRAPHITE 2.0MM
X12'20 FRONT BRACE - GRAPHITE 2.0MM XR372088
€10.75 (RRP inc. VAT)
#XR372330-O - X12 US ALU BUSHING - CENTRIC (2)
X12 US ALU BUSHING - CENTRIC (2) XR372330-O
€15.06 (RRP inc. VAT)
#XR372331-O - X12 US ALU ECCENTRIC BUSHING - WIDTH 0.5MM (2)
X12 US ALU ECCENTRIC BUSHING - WIDTH 0.5MM (2) XR372331-O
€15.06 (RRP inc. VAT)
#XR373015 - X1'19 ALU REAR BULKHEAD - MOTOR (RIGHT)
X1'19 ALU REAR BULKHEAD - MOTOR (RIGHT) XR373015
€40.07 (RRP inc. VAT)
#XR373026 - X12'19 ALU REAR BULKHEAD - (LEFT)
X12'19 ALU REAR BULKHEAD - (LEFT) XR373026
€40.07 (RRP inc. VAT)
#XR376326 - X12'22 GRAPHITE SIDE BRACE 2.5MM - RIGHT & LEFT
X12'22 GRAPHITE SIDE BRACE 2.5MM - RIGHT & LEFT XR376326
€23.09 (RRP inc. VAT)
#XR342480 - ANTI-ROLL BAR FRONT 2.0 MM
ANTI-ROLL BAR FRONT 2.0 MM XR342480
€12.18 (RRP inc. VAT)
#XR376262-K - X1'21 ALU FRONT STAND - BLACK
X1'21 ALU FRONT STAND - BLACK XR376262-K
€27.55 (RRP inc. VAT)
Show per Page: 12, 20, 40, 100, 200
Next >
28
...