Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (78), Ball joint (57), battery (78), Battery holder (27), Bearing (109), Belt (90), Bevel gear (18), Body mount parts (18), Body post (25), Brake (56), Bulkhead (209), Bumper (69), C-Hub (85), Chassis (273), Clip (33), Clutch (139), CVD (53), Damper (2), deck (88), Diff (165), Drive shaft (166), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (9), Flywheel (20), Fuel Tank / tube (7), Hex (134), Impact (1), Layshaft (22), M3 (81), M4 (21), Motor Holder (4), O-ring (49), Pin (168), Pinion gear (133), Pivot Ball (50), Pivot Pin (50), Pulley (67), Radio plate / RX box (11), Rear hub (12), Rear Wing (23), Servo (171), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (288), Shim (123), Shock parts (69), Shock tower (114), Soft (41), Spring (491), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (51), Upper/Top Deck (18), Upright (39), weight (44), Wheel hub (39)
Scale:
18th (2)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Transmission:
4wd (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#FX652101 - CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING
CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING FX652101
€149.76 (RRP inc. VAT)
#FX652107 - CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING
CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING FX652107
€149.76 (RRP inc. VAT)
#FX653103 - 3 PORTS SLEEVE + PISTON - SET
3 PORTS SLEEVE + PISTON - SET FX653103
€149.76 (RRP inc. VAT)
#FX655901 - ENGINE HEAD SHIM 16.7x22.8x0.1 (4)
ENGINE HEAD SHIM 16.7x22.8x0.1 (4) FX655901
€3.28 (RRP inc. VAT)
#XR325318 - XT2 REAR DRIVE SHAFT 95MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
XT2 REAR DRIVE SHAFT 95MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325318
€24.36 (RRP inc. VAT)
#XR355086 - EXTREME HEAT RESISTANT F/R ALU DIFF PIN WITH INSERTS (2+4)
EXTREME HEAT RESISTANT F/R ALU DIFF PIN WITH INSERTS (2+4) XR355086
€34.66 (RRP inc. VAT)
#XR355087 - EXTREME HEAT RESISTANT CENTER ALU DIFF PIN WITH INSERTS (2+4)
EXTREME HEAT RESISTANT CENTER ALU DIFF PIN WITH INSERTS (2+4) XR355087
€34.66 (RRP inc. VAT)
#XR355283 - XT8 CVD DRIVE SHAFT 138MM - HUDY SPRING STEELâ„¢
XT8 CVD DRIVE SHAFT 138MM - HUDY SPRING STEEL™ XR355283
€36.97 (RRP inc. VAT)
#XR365201 - ECS FRONT DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢ - SET
ECS FRONT DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEEL™ - SET XR365201
€58.93 (RRP inc. VAT)
#XR365223 - FRONT ECS DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
FRONT ECS DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR365223
€34.66 (RRP inc. VAT)
#XR358165 - FRONT SHOCK SHAFT 61MM (2)
FRONT SHOCK SHAFT 61MM (2) XR358165
€19.07 (RRP inc. VAT)
#XR358087-M - XB8 SHOCK RUBBER MEMBRANE CELL - MEDIUM (4)
XB8 SHOCK RUBBER MEMBRANE CELL - MEDIUM (4) XR358087-M
€12.18 (RRP inc. VAT)
#XR358087-S - XB8 SHOCK RUBBER MEMBRANE CELL - SOFT (4)
XB8 SHOCK RUBBER MEMBRANE CELL - SOFT (4) XR358087-S
€12.18 (RRP inc. VAT)
#XR358055 - XB8 ALU SHOCK CAP NUT 4x BLEED HOLE - BLACK COATED (2)
XB8 ALU SHOCK CAP NUT 4x BLEED HOLE - BLACK COATED (2) XR358055
€34.66 (RRP inc. VAT)
#XR358043 - COMPOSITE SHOCK BUSHING & SHIM (2+2)
COMPOSITE SHOCK BUSHING & SHIM (2+2) XR358043
€6.30 (RRP inc. VAT)
#XR355215 - CVD ADJUSTABLE DRIVE AXLE - HUDY SPRING STEELâ„¢ (2)
CVD ADJUSTABLE DRIVE AXLE  - HUDY SPRING STEEL™ (2) XR355215
€46.21 (RRP inc. VAT)
#XR353116-XH - COMPOSITE REAR LOWER SUSPENSION ARM - X-HARD
COMPOSITE REAR LOWER SUSPENSION ARM - X-HARD XR353116-XH
€13.87 (RRP inc. VAT)
#XR352378 - XB8 ALU STEERING PLATE - SWISS 7075 T6 (L+R)
XB8 ALU STEERING PLATE - SWISS 7075 T6 (L+R) XR352378
€40.07 (RRP inc. VAT)
#XR352293 - STEEL C-HUB BUSHING (2)
STEEL C-HUB BUSHING (2) XR352293
€7.72 (RRP inc. VAT)
#XR352287 - COMPOSITE C-HUB 16° LEFT
COMPOSITE C-HUB 16° LEFT XR352287
€17.04 (RRP inc. VAT)
#XR352277 - COMPOSITE C-HUB 16° RIGHT
COMPOSITE C-HUB 16° RIGHT XR352277
€17.04 (RRP inc. VAT)
#XR352245 - XB8 C-HUB STEERING BLOCK LB WITH ALU INSERTS
XB8 C-HUB STEERING BLOCK LB WITH ALU INSERTS XR352245
€19.00 (RRP inc. VAT)
#XR352160 - STEEL MOUNTING BALL 6.8MM (2)
STEEL MOUNTING BALL 6.8MM (2) XR352160
€7.61 (RRP inc. VAT)
#XR352121-H - XB8 C-HUB COMPOSITE FRONT LOWER SUSPENSION ARM - HARD
XB8 C-HUB COMPOSITE FRONT LOWER SUSPENSION ARM - HARD XR352121-H
€13.87 (RRP inc. VAT)
#XR321269 - GRAPHITE GEAR BOX HEIGHT ADJUSTMENT PLATE
GRAPHITE GEAR BOX HEIGHT ADJUSTMENT PLATE XR321269
€17.60 (RRP inc. VAT)
#XR321270 - XT2 GRAPHITE GEAR BOX HEIGHT ADJUSTMENT PLATE
XT2 GRAPHITE GEAR BOX HEIGHT ADJUSTMENT PLATE XR321270
€18.79 (RRP inc. VAT)
#XR352498 - XB8 FRONT ANTI-ROLL BAR 2.8MM
XB8 FRONT ANTI-ROLL BAR 2.8MM XR352498
€10.58 (RRP inc. VAT)
#XR353432 - REAR ANTI-ROLL BAR 3.2MM
REAR ANTI-ROLL BAR 3.2MM XR353432
€11.65 (RRP inc. VAT)
#DY199080 - ZIPPER PULLER (2)
ZIPPER PULLER (2) DY199080
€3.61 (RRP inc. VAT)
#XR352120-G - XB8 COMPOSITE FRONT LOWER SUSPENSION ARM - GRAPHITE
XB8 COMPOSITE FRONT LOWER SUSPENSION ARM - GRAPHITE XR352120-G
€18.74 (RRP inc. VAT)
#XR358085 - XB8 SHOCK RUBBER VALVE (4)
XB8 SHOCK RUBBER VALVE (4) XR358085
€9.29 (RRP inc. VAT)
#DY203063 - O-RING FOR 1/8 ON-ROAD SET-UP WHEEL (4)
O-RING FOR 1/8 ON-ROAD SET-UP WHEEL (4) DY203063
€7.86 (RRP inc. VAT)
#XR308290 - XRAY 4S SPRING-SET C=3.0 (2)
XRAY 4S SPRING-SET C=3.0 (2) XR308290
€12.32 (RRP inc. VAT)
#XR324000 - SHORT 2-PAD SLIPPER CLUTCH SET - SHOCKS IN FRONT
SHORT 2-PAD SLIPPER CLUTCH SET - SHOCKS IN FRONT XR324000
€90.61 (RRP inc. VAT)
#XR324015 - ALU FRONT-MID MOTOR (3 G.) PLATE - LOWERED -4MM - SWISS 7075 T6 (3MM)
ALU FRONT-MID MOTOR (3 G.) PLATE - LOWERED -4MM - SWISS 7075 T6 (3MM) XR324015
€33.98 (RRP inc. VAT)
#XR354113 - SUPER-LIGHTWEIGHT VENTILATED BRAKE DISK - PRECISION-GROUND (2)
SUPER-LIGHTWEIGHT VENTILATED BRAKE DISK - PRECISION-GROUND (2) XR354113
€21.37 (RRP inc. VAT)
#XR371019 - X1'19 GRAPHITE CHASSIS 2.5MM - HARD
X1'19 GRAPHITE CHASSIS 2.5MM - HARD XR371019
€120.37 (RRP inc. VAT)
#XR371065 - X1'19 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM
X1'19 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM XR371065
€20.03 (RRP inc. VAT)
#XR371078 - X1'19 GRAPHITE REAR BRACE 2.5MM
X1'19 GRAPHITE REAR BRACE 2.5MM XR371078
€24.16 (RRP inc. VAT)
#XR371096 - X1 GRAPHITE PLATE FOR MOUNTS 2.5MM
X1 GRAPHITE PLATE FOR MOUNTS 2.5MM XR371096
€13.63 (RRP inc. VAT)
#XR372117 - X1'19 GRAPHITE LOWER SUSPENSION ARM 2.5MM
X1'19 GRAPHITE LOWER SUSPENSION ARM 2.5MM XR372117
€19.07 (RRP inc. VAT)
#XR373015 - X1'19 ALU REAR BULKHEAD - MOTOR (RIGHT)
X1'19 ALU REAR BULKHEAD - MOTOR (RIGHT) XR373015
€40.07 (RRP inc. VAT)
#XR373025 - X1'19 ALU REAR BULKHEAD - LEFT
X1'19 ALU REAR BULKHEAD - LEFT XR373025
€40.07 (RRP inc. VAT)
#XR373036 - X1'19 GRAPHITE REAR WING MOUNT 2.5MM
X1'19 GRAPHITE REAR WING MOUNT 2.5MM XR373036
€18.07 (RRP inc. VAT)
#XR376232 - X1'19 GRAPHITE TOP DECK 2.5MM
X1'19 GRAPHITE TOP DECK 2.5MM XR376232
€18.60 (RRP inc. VAT)
#XR376260-O - X1 ALU SERVO MOUNT - ORANGE
X1 ALU SERVO MOUNT - ORANGE XR376260-O
€40.07 (RRP inc. VAT)
#XR379702 - XRAY X1 1/10 FORMULA BODY – WORLD CHAMPION EDITION
XRAY X1 1/10 FORMULA BODY – WORLD CHAMPION EDITION XR379702
€30.98 (RRP inc. VAT)
#XR301151 - T4'19 ALU EXTRA-FLEX CHASSIS 2.0MM - WORLDS EDITION
30%
OFF
T4'19 ALU EXTRA-FLEX CHASSIS 2.0MM - WORLDS EDITION XR301151
€147.42 (RRP inc.VAT)
€103.19 (RRP inc. VAT)
#XR301204 - COMPOSITE BUMPER FOR ADJUSTABLE BODY MOUNTS
COMPOSITE BUMPER FOR ADJUSTABLE BODY MOUNTS XR301204
€8.65 (RRP inc. VAT)
#XR301210 - GRAPHITE BUMPER UPPER HOLDER FOR ADJUSTABLE BODY MOUNTS 2.5MM
GRAPHITE BUMPER UPPER HOLDER FOR ADJUSTABLE BODY MOUNTS 2.5MM XR301210
€19.64 (RRP inc. VAT)
#XR301219 - COMPOSITE UPPER HOLDER FOR BUMPER FOR ADJUSTABLE BODY MOUNTS
COMPOSITE UPPER HOLDER FOR BUMPER FOR ADJUSTABLE BODY MOUNTS XR301219
€7.98 (RRP inc. VAT)
#XR301231 - FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - LIGHT - V2
FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - LIGHT - V2 XR301231
€15.47 (RRP inc. VAT)
#XR301232 - FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - HARD
FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - HARD XR301232
€19.67 (RRP inc. VAT)
#XR301326 - COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET
COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET XR301326
€9.29 (RRP inc. VAT)
#XR301327 - COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET +1MM HEIGHT
COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET +1MM HEIGHT XR301327
€9.29 (RRP inc. VAT)
#XR301328 - COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET +2MM HEIGHT
COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET +2MM HEIGHT XR301328
€9.29 (RRP inc. VAT)
#XR301336 - COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET
COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET XR301336
€9.29 (RRP inc. VAT)
#XR301337 - COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +1MM HEIGHT
COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +1MM HEIGHT XR301337
€9.29 (RRP inc. VAT)
#XR301338 - COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +2MM HEIGHT
COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +2MM HEIGHT XR301338
€9.29 (RRP inc. VAT)
#XR301390 - GRAPHITE SHIM FOR REAR BODY POST ADJUSTMENT 3.0MM (4)
GRAPHITE SHIM FOR REAR BODY POST ADJUSTMENT 3.0MM (4) XR301390
€9.94 (RRP inc. VAT)
#XR302036-O - T4'19 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R) - ORANGE
T4'19 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R) - ORANGE XR302036-O
€54.50 (RRP inc. VAT)
#XR302082 - T4'19 SLP SHOCK TOWER FRONT 3.0MM GRAPHITE
50%
OFF
T4'19 SLP SHOCK TOWER FRONT 3.0MM GRAPHITE XR302082
€24.48 (RRP inc.VAT)
€12.24 (RRP inc. VAT)
#XR302083 - T4'19 ULP SHOCK TOWER FRONT 3.0MM GRAPHITE
50%
OFF
T4'19 ULP SHOCK TOWER FRONT 3.0MM GRAPHITE XR302083
€24.48 (RRP inc.VAT)
€12.24 (RRP inc. VAT)
#XR302547-O - ALU STEERING PLATE 8.5MM FOR DUAL SERVO SAVER - ORANGE - V2
ALU STEERING PLATE 8.5MM FOR DUAL SERVO SAVER - ORANGE - V2 XR302547-O
€35.12 (RRP inc. VAT)
#XR302762-O - T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L - ORANGE
T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L - ORANGE XR302762-O
€35.12 (RRP inc. VAT)
#XR302763-O - T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - ORANGE
T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - ORANGE XR302763-O
€35.12 (RRP inc. VAT)
#XR303005-O - T4'19 ALU LAYSHAFT BULKHEAD RIGHT - ORANGE
T4'19 ALU LAYSHAFT BULKHEAD RIGHT - ORANGE XR303005-O
€23.11 (RRP inc. VAT)
#XR303006-O - T4'19 ALU MOTOR MOUNT - ORANGE
T4'19 ALU MOTOR MOUNT - ORANGE XR303006-O
€43.78 (RRP inc. VAT)
#XR303083 - T4'19 SLP SHOCK TOWER REAR 3.0MM GRAPHITE
T4'19 SLP SHOCK TOWER REAR 3.0MM GRAPHITE XR303083
€40.92 (RRP inc. VAT)
#XR306178 - GRAPHITE BATTERY BACKSTOP 2.2MM
GRAPHITE BATTERY BACKSTOP 2.2MM XR306178
€9.94 (RRP inc. VAT)
#XR306532 - T4’19 ALU CHASSIS STIFFENER - SWISS 7075 T6
50%
OFF
T4’19 ALU CHASSIS STIFFENER - SWISS 7075 T6 XR306532
€14.14 (RRP inc.VAT)
€7.07 (RRP inc. VAT)
#XR323112-H - XT2 COMPOSITE SUSPENSION ARM REAR LOWER - HARD
XT2 COMPOSITE SUSPENSION ARM REAR LOWER - HARD XR323112-H
€9.77 (RRP inc. VAT)
#XR323112-M - XT2 COMPOSITE SUSPENSION ARM REAR LOWER - MEDIUM
XT2 COMPOSITE SUSPENSION ARM REAR LOWER - MEDIUM XR323112-M
€9.77 (RRP inc. VAT)
#XR325319 - XT2 REAR DRIVE SHAFT 93MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
XT2 REAR DRIVE SHAFT 93MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325319
€24.36 (RRP inc. VAT)
#XR388600 - FUEL TANK 30CC
FUEL TANK 30CC XR388600
€36.97 (RRP inc. VAT)
#XR303125-O - ALU SHIM 3x6x3.0MM - ORANGE (10)
ALU SHIM 3x6x3.0MM - ORANGE (10) XR303125-O
€9.83 (RRP inc. VAT)
#XR303718-O - ALU LOWER 2-PIECE SUSPENSION 0.25 ECCENTRIC HOLDER
ALU LOWER 2-PIECE SUSPENSION 0.25 ECCENTRIC HOLDER XR303718-O
€21.26 (RRP inc. VAT)
#XR325390 - ALU SHIM 10x12x2MM (2)
ALU SHIM 10x12x2MM (2) XR325390
€8.47 (RRP inc. VAT)
#XR362250-H - COMPOSITE STEERING BLOCK - HARD
COMPOSITE STEERING BLOCK - HARD XR362250-H
€7.10 (RRP inc. VAT)
#XR364902 - GEAR DIFFERENTIAL FOR 2.5MM PIN - SET
GEAR DIFFERENTIAL FOR 2.5MM PIN - SET XR364902
€72.22 (RRP inc. VAT)
#XR364961 - GEAR DIFF OUTDRIVE ADAPTER FOR 2.5MM PIN - HUDY SPRING STEELâ„¢ (2)
GEAR DIFF OUTDRIVE ADAPTER FOR 2.5MM PIN - HUDY SPRING STEEL™ (2) XR364961
€40.92 (RRP inc. VAT)
#XR365124 - STEEL BEVEL DRIVE GEAR - CNC-MACHINED - 14T
STEEL BEVEL DRIVE GEAR - CNC-MACHINED - 14T XR365124
€34.66 (RRP inc. VAT)
#XR365222 - FRONT DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
FRONT DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR365222
€24.16 (RRP inc. VAT)
#XR365442 - CENTRAL SHAFT UNIVERSAL JOINT FOR MACHINED PINION
CENTRAL SHAFT UNIVERSAL JOINT FOR MACHINED PINION XR365442
€18.19 (RRP inc. VAT)
#XR368192 - FRONT SPRING-SET L=42MM - 2 DOTS (2)
FRONT SPRING-SET L=42MM - 2 DOTS (2) XR368192
€12.32 (RRP inc. VAT)
#XR368193 - FRONT SPRING-SET L=42MM - 3 DOTS (2)
FRONT SPRING-SET L=42MM - 3 DOTS (2) XR368193
€12.32 (RRP inc. VAT)
#XR368194 - FRONT SPRING-SET L=42MM - 4 DOTS (2)
FRONT SPRING-SET L=42MM - 4 DOTS (2) XR368194
€12.32 (RRP inc. VAT)
#XR368292 - REAR SPRING-SET L=57MM - 2 DOTS (2)
REAR SPRING-SET L=57MM - 2 DOTS (2) XR368292
€12.32 (RRP inc. VAT)
#XR368293 - REAR SPRING-SET L=57MM - 3 DOTS (2)
REAR SPRING-SET L=57MM - 3 DOTS (2) XR368293
€12.32 (RRP inc. VAT)
#XR368294 - REAR SPRING-SET L=57MM - 4 DOTS (2)
REAR SPRING-SET L=57MM - 4 DOTS (2) XR368294
€12.32 (RRP inc. VAT)
#FX634101 - CONROD .12 - NR TYPE
CONROD .12 - NR TYPE FX634101
€41.65 (RRP inc. VAT)
#XR321106 - XB2 ALU CHASSIS - SWISS 7075 T6 (2.5MM) - SHORT
XB2 ALU CHASSIS - SWISS 7075 T6 (2.5MM) - SHORT XR321106
€122.54 (RRP inc. VAT)
#XR323354-G - COMPOSITE UPRIGHT REAR - GRAPHITE
COMPOSITE UPRIGHT REAR - GRAPHITE XR323354-G
€10.67 (RRP inc. VAT)
#XR323354-H - COMPOSITE UPRIGHT REAR - HARD
COMPOSITE UPRIGHT REAR - HARD XR323354-H
€7.08 (RRP inc. VAT)
#XR324124 - ALU 2-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED
ALU 2-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED XR324124
€14.77 (RRP inc. VAT)
#XR324125 - ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SWISS 7075 T6 - HARD COATED
ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SWISS 7075 T6 - HARD COATED XR324125
€14.77 (RRP inc. VAT)
#XR325324 - REAR DRIVE SHAFT 75MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
REAR DRIVE SHAFT 75MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325324
€21.98 (RRP inc. VAT)
#XR325325 - REAR DRIVE SHAFT 72MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
REAR DRIVE SHAFT 72MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325325
€21.98 (RRP inc. VAT)
#XR325326 - REAR DRIVE SHAFT 73MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
REAR DRIVE SHAFT 73MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325326
€21.98 (RRP inc. VAT)
#XR326113 - COMPOSITE BATTERY STRAP - SHORT
COMPOSITE BATTERY STRAP - SHORT XR326113
€8.98 (RRP inc. VAT)
#XR335432 - LOW FRICTION DRIVE BELT FRONT 5.0 x 186 MM
LOW FRICTION DRIVE BELT FRONT 5.0 x 186 MM XR335432
€18.20 (RRP inc. VAT)
#XR335443 - LOW FRICTION DRIVE BELT SIDE 4.5 x 396 MM
LOW FRICTION DRIVE BELT SIDE 4.5 x 396 MM XR335443
€20.84 (RRP inc. VAT)
#XR335452 - LOW FRICTION DRIVE BELT REAR 5.5 x 177 MM
LOW FRICTION DRIVE BELT REAR 5.5 x 177 MM XR335452
€18.20 (RRP inc. VAT)
#XR345630 - RX8E ALU PINION GEAR ADAPTER - SWISS 7075 T6
RX8E ALU PINION GEAR ADAPTER - SWISS 7075 T6 XR345630
€36.02 (RRP inc. VAT)
#XR345690 - ALU SHIM 5x16.8x1.5MM BLACK - SWISS 7075 T6 (2)
ALU SHIM 5x16.8x1.5MM BLACK - SWISS 7075 T6 (2) XR345690
€8.65 (RRP inc. VAT)
#XR346130 - RX8E GRAPHITE RADIO PLATE
RX8E GRAPHITE RADIO PLATE XR346130
€94.50 (RRP inc. VAT)
#XR346132 - RX8E GRAPHITE FAN HOLDER
RX8E GRAPHITE FAN HOLDER XR346132
€19.40 (RRP inc. VAT)
#XR354010-G - CENTER DIFF MOUNTING PLATE SET - GRAPHITE
CENTER DIFF MOUNTING PLATE SET - GRAPHITE XR354010-G
€13.02 (RRP inc. VAT)
#XR362510-G - COMPOSITE SERVO SAVER - GRAPHITE
COMPOSITE SERVO SAVER - GRAPHITE XR362510-G
€7.98 (RRP inc. VAT)
#XR363112-H - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD XR363112-H
€9.04 (RRP inc. VAT)
#XR363122-G - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE XR363122-G
€12.83 (RRP inc. VAT)
#XR363122-H - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD XR363122-H
€9.04 (RRP inc. VAT)
#XR371111 - X12'19 GRAPHITE CHASSIS 2.5MM
X12'19 GRAPHITE CHASSIS 2.5MM XR371111
€99.94 (RRP inc. VAT)
#XR371112 - X12'19 ALU CHASSIS 2.0MM - 7075 T6
X12'19 ALU CHASSIS 2.0MM - 7075 T6 XR371112
€91.08 (RRP inc. VAT)
#XR371211 - X12'19 GRAPHITE BUMPER LOWER HOLDER 2.5MM
X12'19 GRAPHITE BUMPER LOWER HOLDER 2.5MM XR371211
€15.06 (RRP inc. VAT)
#XR372072 - COMPOSITE BALL-BEARING HUB (2)
COMPOSITE BALL-BEARING HUB (2) XR372072
€8.28 (RRP inc. VAT)
#XR373016 - X12'19 ALU REAR BULKHEAD - MOTOR (RIGHT)
X12'19 ALU REAR BULKHEAD - MOTOR (RIGHT) XR373016
€40.07 (RRP inc. VAT)
#XR373026 - X12'19 ALU REAR BULKHEAD - (LEFT)
X12'19 ALU REAR BULKHEAD - (LEFT) XR373026
€40.07 (RRP inc. VAT)
#XR373041 - ALU UPPER CLAMP FOR BALL-BEARING WITH COMPOSITE HUB
ALU UPPER CLAMP FOR BALL-BEARING WITH COMPOSITE HUB XR373041
€21.37 (RRP inc. VAT)
#XR373042 - ALU UPPER ECCENTRIC CLAMP FOR BALL-BEARING - SWISS 7075 T6
ALU UPPER ECCENTRIC CLAMP FOR BALL-BEARING - SWISS 7075 T6 XR373042
€21.37 (RRP inc. VAT)
#XR373086 - X12'19 REAR BRACE - GRAPHITE 2.5MM
X12'19 REAR BRACE - GRAPHITE 2.5MM XR373086
€24.95 (RRP inc. VAT)
#XR373087 - X12 GRAPHITE BATTERY BACKSTOP 2.2MM - V2
X12 GRAPHITE BATTERY BACKSTOP 2.2MM - V2 XR373087
€18.07 (RRP inc. VAT)
#XR940513 - BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2)
BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2) XR940513
€5.51 (RRP inc. VAT)
#DY293011 - HUDY STAINLESS STEEL BATTERY WEIGHT 35G
HUDY STAINLESS STEEL BATTERY WEIGHT 35G DY293011
€17.08 (RRP inc. VAT)
#XR358027 - 2-WAY FLOW DELRIN SHOCK PISTON 5-H. (1.5MM) & 2-H. (1.0MM) (2)
2-WAY FLOW DELRIN SHOCK PISTON 5-H. (1.5MM) & 2-H. (1.0MM) (2) XR358027
€17.04 (RRP inc. VAT)
#XR358028 - 2-WAY FLOW DELRIN SHOCK PISTON 6-H. (1.3MM) & 2-H. (1.1MM) (2)
2-WAY FLOW DELRIN SHOCK PISTON 6-H. (1.3MM) & 2-H. (1.1MM) (2) XR358028
€17.04 (RRP inc. VAT)
#XR358029 - 2-WAY FLOW DELRIN SHOCK PISTON 6-H. (1.4MM) & 2-H. (1.1MM) (2)
2-WAY FLOW DELRIN SHOCK PISTON 6-H. (1.4MM) & 2-H. (1.1MM) (2) XR358029
€17.04 (RRP inc. VAT)
#XR358030 - 2-WAY FLOW DELRIN SHOCK PISTON 8-H. (1.2MM) & 2-H. (1.2MM) (2)
2-WAY FLOW DELRIN SHOCK PISTON 8-H. (1.2MM) & 2-H. (1.2MM) (2) XR358030
€17.04 (RRP inc. VAT)
#XR358031 - 2-WAY FLOW DELRIN SHOCK PISTON 8-H. (1.3MM) & 2-H. (1.2MM) (2)
2-WAY FLOW DELRIN SHOCK PISTON 8-H. (1.3MM) & 2-H. (1.2MM) (2) XR358031
€17.04 (RRP inc. VAT)
#XR358709 - ALU MONOBLOCK ENGINE MOUNT - SWISS 7075 T6
ALU MONOBLOCK ENGINE MOUNT - SWISS 7075 T6 XR358709
€69.30 (RRP inc. VAT)
#XR374902 - XRAY GEAR DIFFERENTIAL 1/10 PAN CAR - SET - V2
XRAY GEAR DIFFERENTIAL 1/10 PAN CAR - SET - V2 XR374902
€115.51 (RRP inc. VAT)
#XR304981 - COMPOSITE GEAR DIFF CROSS PIN WITH HOLE
COMPOSITE GEAR DIFF CROSS PIN WITH HOLE XR304981
€6.96 (RRP inc. VAT)
#XR323382 - ALU REAR HUB PLATE FOR MULTI ADJ. UPRIGHT - 1-HOLE - SWISS 7075 T6
ALU REAR HUB PLATE FOR MULTI ADJ. UPRIGHT - 1-HOLE - SWISS 7075 T6 XR323382
€17.98 (RRP inc. VAT)
#XR345888-O - LOW FRICTION COMPOSITE SIDE BELT PULLEY 28T - FRONT - GRAPHITE
LOW FRICTION COMPOSITE SIDE BELT PULLEY 28T - FRONT - GRAPHITE XR345888-O
€10.75 (RRP inc. VAT)
#XR345889-O - LOW FRICTION COMPOSITE SIDE BELT PULLEY 29T - FRONT - GRAPHITE
LOW FRICTION COMPOSITE SIDE BELT PULLEY 29T - FRONT - GRAPHITE XR345889-O
€10.75 (RRP inc. VAT)
#XR374900 - XRAY GEAR DIFFERENTIAL 1/12 PAN CAR - SET - V2
XRAY GEAR DIFFERENTIAL 1/12 PAN CAR - SET - V2 XR374900
€115.51 (RRP inc. VAT)
#XR374901 - XRAY GEAR DIFFERENTIAL 1/10 FORMULA - SET - V2
XRAY GEAR DIFFERENTIAL 1/10 FORMULA - SET - V2 XR374901
€115.51 (RRP inc. VAT)
#XR374910 - COMPOSITE GEAR DIFFERENTIAL CASE - GRAPHITE
COMPOSITE GEAR DIFFERENTIAL CASE - GRAPHITE XR374910
€15.71 (RRP inc. VAT)
#XR374920 - COMPOSITE GEAR DIFFERENTIAL COVER - GRAPHITE
COMPOSITE GEAR DIFFERENTIAL COVER - GRAPHITE XR374920
€10.46 (RRP inc. VAT)
#XR374930 - COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4)
COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) XR374930
€19.07 (RRP inc. VAT)
#XR374970 - ALU GEAR DIFFERENTIAL SHAFT - SWISS 7075 T6
ALU GEAR DIFFERENTIAL SHAFT - SWISS 7075 T6 XR374970
€17.54 (RRP inc. VAT)
#XR374990 - GEAR DIFF GASKET (4)
GEAR DIFF GASKET (4) XR374990
€5.22 (RRP inc. VAT)
#XR375032 - X12 ALU REAR WHEEL HUB FOR GEAR DIFF - RIGHT
X12 ALU REAR WHEEL HUB FOR GEAR DIFF - RIGHT XR375032
€37.44 (RRP inc. VAT)
#XR375037 - X1 ALU REAR WHEEL HUB FOR GEAR DIFF - RIGHT
X1 ALU REAR WHEEL HUB FOR GEAR DIFF - RIGHT XR375037
€40.07 (RRP inc. VAT)
#XR375776 - COMPOSITE GEAR DIFF SPUR GEAR - 76T / 64P
COMPOSITE GEAR DIFF SPUR GEAR - 76T / 64P XR375776
€10.46 (RRP inc. VAT)
#XR375780 - COMPOSITE GEAR DIFF SPUR GEAR - 80T / 64P
COMPOSITE GEAR DIFF SPUR GEAR - 80T / 64P XR375780
€10.46 (RRP inc. VAT)
#XR375784 - COMPOSITE GEAR DIFF SPUR GEAR - 84T / 64P
COMPOSITE GEAR DIFF SPUR GEAR - 84T / 64P XR375784
€10.46 (RRP inc. VAT)
#XR375788 - COMPOSITE GEAR DIFF SPUR GEAR - 88T / 64P
COMPOSITE GEAR DIFF SPUR GEAR - 88T / 64P XR375788
€10.46 (RRP inc. VAT)
#XR375792 - COMPOSITE GEAR DIFF SPUR GEAR - 92T / 64P
COMPOSITE GEAR DIFF SPUR GEAR - 92T / 64P XR375792
€10.46 (RRP inc. VAT)
#XR971255 - SILICONE O-RING 25.5x0.7 (10)
SILICONE O-RING 25.5x0.7  (10) XR971255
€9.29 (RRP inc. VAT)
#DY293441 - ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - OFFSET 2-HOLE M3 - 23T
ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - OFFSET 2-HOLE M3 - 23T DY293441
€18.72 (RRP inc. VAT)
#DY293442 - ALU CLAMP THROTTLE SERVO HORN - HITEC - OFFSET 2-HOLE M3 - 24T
ALU CLAMP THROTTLE SERVO HORN - HITEC - OFFSET 2-HOLE M3 - 24T DY293442
€18.72 (RRP inc. VAT)
#DY293443 - ALU CLAMP THROTTLE SERVO HORN - FUTABA, SAVÖX - OFFSET 2-HOLE M3 - 25T
 DY293443
€18.72 (RRP inc. VAT)
#DY293444 - ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - 2-HOLE - 23T
ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - 2-HOLE - 23T DY293444
€18.72 (RRP inc. VAT)
#DY293445 - ALU CLAMP THROTTLE SERVO HORN - HITEC - 2-HOLE - 24T
ALU CLAMP THROTTLE SERVO HORN - HITEC - 2-HOLE - 24T DY293445
€18.72 (RRP inc. VAT)
#DY293446 - ALU CLAMP THROTTLE SERVO HORN - FUTABA, SAVÖX - 2-HOLE - 25T
 DY293446
€18.72 (RRP inc. VAT)
#DY293447 - ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - 2-HOLE M3 - 23T
ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - 2-HOLE M3 - 23T DY293447
€18.72 (RRP inc. VAT)
#DY293448 - ALU CLAMP THROTTLE SERVO HORN - HITEC - 2-HOLE M3 - 24T
ALU CLAMP THROTTLE SERVO HORN - HITEC - 2-HOLE M3 - 24T DY293448
€18.72 (RRP inc. VAT)
#XR325012 - BALL DIFFERENTIAL SHORT OUTPUT SHAFT 2.5MM - HUDY SPRING STEELâ„¢
BALL DIFFERENTIAL SHORT OUTPUT SHAFT 2.5MM - HUDY SPRING STEEL™ XR325012
€35.10 (RRP inc. VAT)
#XR325022 - BALL DIFFERENTIAL LONG OUTPUT SHAFT 2.5MM - HUDY SPRING STEEL™
 XR325022
€29.02 (RRP inc. VAT)
#XR325061 - SCREW FOR EXTERNAL BALL DIFF ADJUSTMENT 2.5MM - HUDY SPRING STEELâ„¢
SCREW FOR EXTERNAL BALL DIFF ADJUSTMENT 2.5MM - HUDY SPRING STEEL™ XR325061
€8.98 (RRP inc. VAT)
#XR325072 - ALU BALL DIFFERENTIAL 2.5MM NUT
ALU BALL DIFFERENTIAL 2.5MM NUT XR325072
€7.58 (RRP inc. VAT)
#XR930126 - CARBIDE BALL-BEARING AXIAL 2.6x6x1
CARBIDE BALL-BEARING AXIAL 2.6x6x1 XR930126
€12.32 (RRP inc. VAT)
#XR980322-T - TITAN PIN 3x22 (2)
TITAN PIN 3x22  (2) XR980322-T
€6.30 (RRP inc. VAT)
#XR303716-O - ALU LOWER 2-PIECE SUSPENSION HOLDER - RIGHT - LOW
ALU LOWER 2-PIECE SUSPENSION HOLDER - RIGHT - LOW XR303716-O
€21.26 (RRP inc. VAT)
#XR325340 - REAR DRIVE AXLE LB - HUDY SPRING STEELâ„¢
REAR DRIVE AXLE LB - HUDY SPRING STEEL™ XR325340
€18.68 (RRP inc. VAT)
#XR335800-O - COMPOSITE BELT PULLEY COVER SET - GRAPHITE
COMPOSITE BELT PULLEY COVER SET - GRAPHITE XR335800-O
€11.14 (RRP inc. VAT)
#XR335801-O - LOW FRICTION COMPOSITE BELT PULLEY SET - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY SET - GRAPHITE XR335801-O
€47.38 (RRP inc. VAT)
#XR335810-O - LOW FRICTION COMPOSITE BELT PULLEY 20T - 2-SPEED-CENTER - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY 20T - 2-SPEED-CENTER - GRAPHITE XR335810-O
€9.83 (RRP inc. VAT)
#XR335828-O - LOW FRICTION COMPOSITE BELT PULLEY 18T - 2-SPEED-SIDE - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY 18T - 2-SPEED-SIDE - GRAPHITE XR335828-O
€9.83 (RRP inc. VAT)
#XR335859-O - LOW FRICTION COMPOSITE BELT PULLEY 19T - MID-CENTER - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY 19T - MID-CENTER - GRAPHITE XR335859-O
€9.83 (RRP inc. VAT)
#XR335885-O - LOW FRICTION COMPOSITE BELT PULLEY 25T - MID-SIDE - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY 25T - MID-SIDE - GRAPHITE XR335885-O
€9.83 (RRP inc. VAT)
#XR335886-O - LOW FRICTION COMPOSITE BELT PULLEY 26T - MID-SIDE - GRAPHITE
LOW FRICTION COMPOSITE BELT PULLEY 26T - MID-SIDE - GRAPHITE XR335886-O
€9.83 (RRP inc. VAT)
#XR352134 - GT FRONT UPPER ARM
GT FRONT UPPER ARM XR352134
€13.87 (RRP inc. VAT)
#XR941014 - BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2)
BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2) XR941014
€5.51 (RRP inc. VAT)
#DY106053 - SET OF REPLACEMENT DRIVE SHAFT PINS 2.5x10 (10)
SET OF REPLACEMENT DRIVE SHAFT PINS 2.5x10  (10)  DY106053
€6.26 (RRP inc. VAT)
#DY293401 - ALU CLAMP SERVO HORN - KO PROPO, SANWA - OFFSET 1-HOLE M3 - 23T
ALU CLAMP SERVO HORN - KO PROPO, SANWA - OFFSET 1-HOLE M3 - 23T DY293401
€18.72 (RRP inc. VAT)
#DY293402 - ALU CLAMP SERVO HORN - HITEC - OFFSET 1-HOLE M3 - 24T
ALU CLAMP SERVO HORN - HITEC - OFFSET 1-HOLE M3 - 24T DY293402
€18.72 (RRP inc. VAT)
#DY293403 - ALU CLAMP SERVO HORN - FUTABA, SAVÖX - OFFSET 1-HOLE M3 - 25T
 DY293403
€18.72 (RRP inc. VAT)
#DY293404 - ALU CLAMP SERVO HORN - KO PROPO, SANWA - 2-HOLE M3 - 23T
ALU CLAMP SERVO HORN - KO PROPO, SANWA - 2-HOLE M3 - 23T DY293404
€18.72 (RRP inc. VAT)
#DY293405 - ALU CLAMP SERVO HORN - HITEC - 2-HOLE M3 - 24T
ALU CLAMP SERVO HORN - HITEC - 2-HOLE M3 - 24T DY293405
€18.72 (RRP inc. VAT)
#DY293406 - ALU CLAMP SERVO HORN - FUTABA, SAVÖX - 2-HOLE M3 - 25T
 DY293406
€18.72 (RRP inc. VAT)
#DY293407 - ALU CLAMP SERVO HORN - KO PROPO, SANWA - 3-HOLE M3 - 23T
ALU CLAMP SERVO HORN - KO PROPO, SANWA - 3-HOLE M3 - 23T DY293407
€18.72 (RRP inc. VAT)
#DY293408 - ALU CLAMP SERVO HORN - HITEC - 3-HOLE M3 - 24T
ALU CLAMP SERVO HORN - HITEC - 3-HOLE M3 - 24T DY293408
€18.72 (RRP inc. VAT)
#DY293409 - ALU CLAMP SERVO HORN - FUTABA, SAVÖX - 3-HOLE M3 - 25T
 DY293409
€18.72 (RRP inc. VAT)
#XR303717-O - ALU LOWER 2-PIECE SUSPENSION HOLDER - LEFT - LOW
ALU LOWER 2-PIECE SUSPENSION HOLDER - LEFT - LOW XR303717-O
€21.26 (RRP inc. VAT)
#XR303722-O - ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - LOW
50%
OFF
ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - LOW XR303722-O
€25.88 (RRP inc.VAT)
€12.95 (RRP inc. VAT)
#XR323353-M - COMPOSITE UPRIGHT REAR - MEDIUM
COMPOSITE UPRIGHT REAR - MEDIUM XR323353-M
€7.08 (RRP inc. VAT)
#XR355819 - ALU PINION GEAR - HARD COATED 19T
ALU PINION GEAR - HARD COATED 19T XR355819
€25.42 (RRP inc. VAT)
#XR355821 - ALU PINION GEAR - HARD COATED 21T
ALU PINION GEAR - HARD COATED 21T XR355821
€25.42 (RRP inc. VAT)
#XR355822 - ALU PINION GEAR - HARD COATED 22T
ALU PINION GEAR - HARD COATED 22T XR355822
€25.42 (RRP inc. VAT)
#XR355823 - ALU PINION GEAR - HARD COATED 23T
ALU PINION GEAR - HARD COATED 23T XR355823
€25.42 (RRP inc. VAT)
#XR323353-H - COMPOSITE UPRIGHT REAR - HARD
COMPOSITE UPRIGHT REAR - HARD XR323353-H
€7.08 (RRP inc. VAT)
#XR352120-M - XB8 COMPOSITE FRONT LOWER SUSPENSION ARM - MEDIUM
XB8 COMPOSITE FRONT LOWER SUSPENSION ARM - MEDIUM XR352120-M
€13.87 (RRP inc. VAT)
#XR352292 - STEEL STEERING BLOCK PIVOT PIN (2)
STEEL STEERING BLOCK PIVOT PIN (2) XR352292
€15.06 (RRP inc. VAT)
#XR353389 - ALU SHIM 8x10x1.2 (2)
ALU SHIM 8x10x1.2 (2) XR353389
€3.67 (RRP inc. VAT)
#XR355820 - ALU PINION GEAR - HARD COATED 20T
ALU PINION GEAR - HARD COATED 20T XR355820
€25.42 (RRP inc. VAT)
#XR372116 - GRAPHITE LOWER SUSPENSION ARM 2.5MM - WIDE
GRAPHITE LOWER SUSPENSION ARM 2.5MM - WIDE XR372116
€19.07 (RRP inc. VAT)
#XR372134 - GRAPHITE UPPER SUSPENSION ARM 2.5MM - WIDE
GRAPHITE UPPER SUSPENSION ARM 2.5MM - WIDE XR372134
€19.07 (RRP inc. VAT)
#XR302101 - ALU FRONT & REAR SUSPENSION ARM 1-HOLE - SWISS 7075 T6 (2+2)
ALU FRONT & REAR SUSPENSION ARM 1-HOLE - SWISS 7075 T6 (2+2) XR302101
€147.88 (RRP inc. VAT)