All Items
Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (86), Ball joint (58), battery (78), Battery holder (27), Bearing (130), Belt (92), Bevel gear (18), Body mount parts (18), Body post (26), Brake (56), Bulkhead (210), Bumper (70), C-Hub (85), Chassis (284), Clip (36), Clutch (142), CVD (53), Damper (2), deck (88), Diff (175), Drive shaft (167), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (11), Flywheel (23), Fuel Tank / tube (7), Hex (150), Impact (1), Layshaft (22), M3 (87), M4 (24), Motor Holder (4), O-ring (49), Pin (180), Pinion gear (133), Pivot Ball (50), Pivot Pin (53), Pulley (68), Radio plate / RX box (11), Rear hub (12), Rear Wing (40), Servo (191), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (306), Shim (128), Shock parts (69), Shock tower (113), Soft (47), Spring (501), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (65), Upper/Top Deck (18), Upright (39), weight (56), Wheel hub (40)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR323552 - XT2 GRAPHITE REAR SHOCK TOWER EXTENSION 4.0MM (2)
XT2 GRAPHITE REAR SHOCK TOWER EXTENSION 4.0MM (2) XR323552
€14.77 (RRP inc. VAT)
#XR324000 - SHORT 2-PAD SLIPPER CLUTCH SET - SHOCKS IN FRONT
SHORT 2-PAD SLIPPER CLUTCH SET - SHOCKS IN FRONT XR324000
€90.61 (RRP inc. VAT)
#XR324012 - ALU FRONT-MID MOTOR (3 GEARS) PLATE - SWISS 7075 T6 (3MM)
ALU FRONT-MID MOTOR (3 GEARS) PLATE - SWISS 7075 T6 (3MM) XR324012
€26.28 (RRP inc. VAT)
#XR324014 - ALU MID & REAR MOTOR PLATE - SHORT ROD - SWISS 7075 T6 (3MM)
ALU MID & REAR MOTOR PLATE - SHORT ROD - SWISS 7075 T6 (3MM) XR324014
€40.78 (RRP inc. VAT)
#XR324015 - ALU FRONT-MID MOTOR (3 G.) PLATE - LOWERED -4MM - SWISS 7075 T6 (3MM)
ALU FRONT-MID MOTOR (3 G.) PLATE - LOWERED -4MM - SWISS 7075 T6 (3MM) XR324015
€33.98 (RRP inc. VAT)
#XR324016 - ALU MOTOR PLATE - LCG - SWISS 7075 T6
ALU MOTOR PLATE - LCG - SWISS 7075 T6 XR324016
€33.98 (RRP inc. VAT)
#XR324016-L - ALU MOTOR PLATE FOR 3G GEAR BOX -1MM - 1-DOT - SWISS 7075 T6
ALU MOTOR PLATE FOR 3G GEAR BOX -1MM - 1-DOT - SWISS 7075 T6 XR324016-L
€33.98 (RRP inc. VAT)
#XR324018 - ALU MOTOR PLATE FOR 5G GEAR BOX - SWISS 7075 T6
ALU MOTOR PLATE FOR 5G GEAR BOX - SWISS 7075 T6 XR324018
€33.98 (RRP inc. VAT)
#XR324020 - COMPOSITE MOUNT FOR UPPER BRACE
COMPOSITE MOUNT FOR UPPER BRACE XR324020
€14.77 (RRP inc. VAT)
#XR324021 - COMPOSITE MOUNT FOR UPPER BRACE - LCG
COMPOSITE MOUNT FOR UPPER BRACE - LCG XR324021
€14.77 (RRP inc. VAT)
#XR324030 - COMPOSITE MOTOR PLATE BRACE
COMPOSITE MOTOR PLATE BRACE XR324030
€7.45 (RRP inc. VAT)
#XR324031 - COMPOSITE FRONT-MID MOTOR (3 GEARS) PLATE BRACE
COMPOSITE FRONT-MID MOTOR (3 GEARS) PLATE BRACE XR324031
€7.45 (RRP inc. VAT)
#XR324040 - COMPOSITE MOTOR UPPER BRACE - CARPET EDITION
COMPOSITE MOTOR UPPER BRACE - CARPET EDITION XR324040
€10.38 (RRP inc. VAT)
#XR324041 - COMPOSITE MOTOR UPPER BRACE - DIRT EDITION
COMPOSITE MOTOR UPPER BRACE - DIRT EDITION XR324041
€10.38 (RRP inc. VAT)
#XR324042 - COMPOSITE MOTOR UPPER BRACE - LCG
COMPOSITE MOTOR UPPER BRACE - LCG XR324042
€10.38 (RRP inc. VAT)
#XR324050 - COMPOSITE GEAR COVER - DIRT EDITION
COMPOSITE GEAR COVER - DIRT EDITION XR324050
€14.77 (RRP inc. VAT)
#XR324051 - COMPOSITE GEAR COVER - FRONT MOTOR POSITION
COMPOSITE GEAR COVER - FRONT MOTOR POSITION XR324051
€8.98 (RRP inc. VAT)
#XR324052 - COMPOSITE GEAR COVER - LCG
COMPOSITE GEAR COVER - LCG XR324052
€8.98 (RRP inc. VAT)
#XR324101 - SLIPPER ELIMINATOR - LCG - SET
SLIPPER ELIMINATOR - LCG - SET XR324101
€36.71 (RRP inc. VAT)
#XR324102 - SOLID AXLE - LCG - LIGHTWEIGHT - SET
SOLID AXLE - LCG - LIGHTWEIGHT - SET XR324102
€49.68 (RRP inc. VAT)
#XR324110 - ALU TOP SHAFT 20T - SWISS 7075 T6 - HARD COATED
ALU TOP SHAFT 20T - SWISS 7075 T6 - HARD COATED XR324110
€26.28 (RRP inc. VAT)
#XR324112 - ALU TOP SHAFT 20T - SHORT - SWISS 7075 T6 - HARD COATED
ALU TOP SHAFT 20T - SHORT - SWISS 7075 T6 - HARD COATED XR324112
€39.19 (RRP inc. VAT)
#XR324113 - ALU 3-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED
ALU 3-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED XR324113
€39.19 (RRP inc. VAT)
#XR324114 - ALU 2-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED
ALU 2-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED XR324114
€39.19 (RRP inc. VAT)
#XR324120 - ALU 3-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED
ALU 3-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED XR324120
€14.77 (RRP inc. VAT)
#XR324121 - ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SWISS 7075 T6 - HARD COATED
ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SWISS 7075 T6 - HARD COATED XR324121
€14.77 (RRP inc. VAT)
#XR324122 - ALU SLIPPER ELIMINATOR DISC CARRIER - SWISS 7075 T6
ALU SLIPPER ELIMINATOR DISC CARRIER - SWISS 7075 T6 XR324122
€14.77 (RRP inc. VAT)
#XR324123 - ALU SLIPPER ELIMINATOR SPACER - SWISS 7075 T6
ALU SLIPPER ELIMINATOR SPACER - SWISS 7075 T6 XR324123
€8.22 (RRP inc. VAT)
#XR324124 - ALU 2-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED
ALU 2-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED XR324124
€14.77 (RRP inc. VAT)
#XR324125 - ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SWISS 7075 T6 - HARD COATED
ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SWISS 7075 T6 - HARD COATED XR324125
€14.77 (RRP inc. VAT)
#XR324126 - ALU 2-PAD SLIPPER CLUTCH PLATE - SHORT - SWISS 7075 T6
ALU 2-PAD SLIPPER CLUTCH PLATE - SHORT - SWISS 7075 T6 XR324126
€20.40 (RRP inc. VAT)
#XR324127 - ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SHORT - SWISS 7075 T6
ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - SHORT - SWISS 7075 T6 XR324127
€18.58 (RRP inc. VAT)
#XR324128 - ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6
ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6 XR324128
€18.58 (RRP inc. VAT)
#XR324129 - ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6
ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6 XR324129
€18.58 (RRP inc. VAT)
#XR324130-L - ALU 2-PAD SLIPPER CLUTCH PLATES - VENTILATED - SET
ALU 2-PAD SLIPPER CLUTCH PLATES - VENTILATED - SET XR324130-L
€39.60 (RRP inc. VAT)
#XR324132 - ALU 2-PAD SLIPPER CLUTCH PLATE 31MM WITH ADAPTER - LCG - SWISS 7075 T6
ALU 2-PAD SLIPPER CLUTCH PLATE 31MM WITH ADAPTER - LCG - SWISS 7075 T6 XR324132
€18.58 (RRP inc. VAT)
#XR324172 - COMPOSITE ADJUSTMENT BALL-BEARING HUB - 1+2+3 DOTS (2)
COMPOSITE ADJUSTMENT BALL-BEARING HUB - 1+2+3 DOTS (2) XR324172
€8.10 (RRP inc. VAT)
#XR324191 - STEEL SLIPPER CLUTCH NUT - HUDY SPRING STEELâ„¢
STEEL SLIPPER CLUTCH NUT - HUDY SPRING STEEL™ XR324191
€16.69 (RRP inc. VAT)
#XR324225 - COMPOSITE GEAR 25T - GRAPHITE
COMPOSITE GEAR 25T - GRAPHITE XR324225
€8.98 (RRP inc. VAT)
#XR324236 - COMPOSITE GEAR 36T - GRAPHITE
COMPOSITE GEAR 36T - GRAPHITE XR324236
€8.98 (RRP inc. VAT)