All Items
Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (86), Ball joint (58), battery (78), Battery holder (27), Bearing (130), Belt (93), Bevel gear (18), Body mount parts (18), Body post (26), Brake (56), Bulkhead (210), Bumper (70), C-Hub (85), Chassis (286), Clip (36), Clutch (142), CVD (53), Damper (2), deck (88), Diff (176), Drive shaft (167), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (11), Flywheel (23), Fuel Tank / tube (7), Hex (150), Impact (1), Layshaft (22), M3 (87), M4 (24), Motor Holder (4), O-ring (49), Pin (180), Pinion gear (133), Pivot Ball (50), Pivot Pin (53), Pulley (69), Radio plate / RX box (11), Rear hub (12), Rear Wing (40), Servo (191), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (306), Shim (128), Shock parts (69), Shock tower (114), Soft (47), Spring (501), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (65), Upper/Top Deck (18), Upright (39), weight (56), Wheel hub (40)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR362648 - BALL END 4.9MM WITH THREAD 4MM (2) - (replacement for #302652)
BALL END 4.9MM WITH THREAD 4MM (2) - (replacement for #302652) XR362648
€9.29 (RRP inc. VAT)
#XR362649 - BALL END 4.9MM WITH THREAD 5MM (2)
BALL END 4.9MM WITH THREAD 5MM (2) XR362649
€9.29 (RRP inc. VAT)
#XR362650 - BALL END 4.9MM WITH THREAD 6MM (2)
BALL END 4.9MM WITH THREAD 6MM (2) XR362650
€9.29 (RRP inc. VAT)
#XR362652 - BALL END 4.9MM WITH THREAD 10MM (2)
BALL END 4.9MM WITH THREAD 10MM (2) XR362652
€9.29 (RRP inc. VAT)
#XR363040 - REAR SHOCK TOWER PROTECTOR
REAR SHOCK TOWER PROTECTOR XR363040
€10.75 (RRP inc. VAT)
#XR363080 - GRAPHITE SHOCK TOWER REAR 3.0MM - V3
GRAPHITE SHOCK TOWER REAR 3.0MM - V3 XR363080
€40.92 (RRP inc. VAT)
#XR363083 - XT4 GRAPHITE SHOCK TOWER REAR 3.5MM
XT4 GRAPHITE SHOCK TOWER REAR 3.5MM XR363083
€42.73 (RRP inc. VAT)
#XR363084 - ALU SHOCK TOWER REAR 3.0MM - SWISS 7075 T6 - V2
ALU SHOCK TOWER REAR 3.0MM - SWISS 7075 T6 - V2 XR363084
€42.73 (RRP inc. VAT)
#XR363085 - GRAPHITE SHOCK TOWER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR - 3.5MM
GRAPHITE SHOCK TOWER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR - 3.5MM XR363085
€41.56 (RRP inc. VAT)
#XR363087 - GRAPHITE SHOCK TOWER FOR HS BULKHEAD - REAR - 3.5MM - LOWER
GRAPHITE SHOCK TOWER FOR HS BULKHEAD - REAR - 3.5MM - LOWER XR363087
€42.73 (RRP inc. VAT)
#XR363088 - CARBON SHOCK TOWER FOR HS BULKHEAD - 3-DOTS - REAR
CARBON SHOCK TOWER FOR HS BULKHEAD - 3-DOTS - REAR XR363088
€42.73 (RRP inc. VAT)
#XR363110 - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT XR363110
€6.56 (RRP inc. VAT)
#XR363111 - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - V2
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - V2 XR363111
€9.04 (RRP inc. VAT)
#XR363111-G - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE XR363111-G
€12.83 (RRP inc. VAT)
#XR363111-H - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD XR363111-H
€9.04 (RRP inc. VAT)
#XR363112-H - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD XR363112-H
€9.04 (RRP inc. VAT)
#XR363112-M - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - MEDIUM
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - MEDIUM XR363112-M
€9.04 (RRP inc. VAT)
#XR363113-G - COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE
COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE XR363113-G
€12.83 (RRP inc. VAT)
#XR363113-H - COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - HARD
COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - HARD XR363113-H
€9.04 (RRP inc. VAT)
#XR363113-M - COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - MEDIUM
COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - MEDIUM XR363113-M
€9.04 (RRP inc. VAT)
#XR363114-G - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - GRAPHITE XR363114-G
€12.83 (RRP inc. VAT)
#XR363114-H - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - HARD
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - HARD XR363114-H
€9.04 (RRP inc. VAT)
#XR363114-M - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - MEDIUM
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - MEDIUM XR363114-M
€9.04 (RRP inc. VAT)
#XR363120 - COMPOSITE SUSPENSION ARM REAR LOWER LEFT
COMPOSITE SUSPENSION ARM REAR LOWER LEFT XR363120
€8.10 (RRP inc. VAT)
#XR363121 - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - V2
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - V2 XR363121
€9.04 (RRP inc. VAT)
#XR363121-G - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE XR363121-G
€12.83 (RRP inc. VAT)
#XR363121-H - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD XR363121-H
€9.04 (RRP inc. VAT)
#XR363122-G - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE XR363122-G
€12.83 (RRP inc. VAT)
#XR363122-H - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD XR363122-H
€9.04 (RRP inc. VAT)
#XR363122-M - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - MEDIUM
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - MEDIUM XR363122-M
€9.04 (RRP inc. VAT)
#XR363123-H - COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - HARD
COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - HARD XR363123-H
€9.04 (RRP inc. VAT)
#XR363123-M - COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - MEDIUM
COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - MEDIUM XR363123-M
€9.04 (RRP inc. VAT)
#XR363124-G - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - GRAPHITE XR363124-G
€12.83 (RRP inc. VAT)
#XR363124-H - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - HARD
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - HARD XR363124-H
€9.04 (RRP inc. VAT)
#XR363124-M - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - MEDIUM
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - MEDIUM XR363124-M
€9.04 (RRP inc. VAT)
#XR363190 - GRAPHITE REAR LOWER ARM PLATE 1.6MM (L+R)
GRAPHITE REAR LOWER ARM PLATE 1.6MM (L+R) XR363190
€27.28 (RRP inc. VAT)
#XR363240 - BALL UNIVERSAL 5.8MM WITH BACKSTOP (2)
BALL UNIVERSAL 5.8MM WITH BACKSTOP (2) XR363240
€9.29 (RRP inc. VAT)
#XR363242 - PIVOT BALL 5.8MM ECCENTRIC (2)
PIVOT BALL 5.8MM ECCENTRIC (2) XR363242
€9.29 (RRP inc. VAT)
#XR363310 - ALU REAR LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM)
ALU REAR LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM) XR363310
€23.77 (RRP inc. VAT)
#XR363311 - ALU REAR LOWER SUSP. HOLDER +2 - FRONT - 7075 T6 (5MM)
ALU REAR LOWER SUSP. HOLDER +2 - FRONT - 7075 T6 (5MM) XR363311
€25.88 (RRP inc. VAT)
#XR363313 - BRASS REAR LOWER SUSPENSION HOLDER SET +2 - RR+RF
BRASS REAR LOWER SUSPENSION HOLDER SET +2 - RR+RF XR363313
€73.69 (RRP inc. VAT)
#XR363314 - ALU LOWER SUSP. HOLDER 3° REAR-FRONT - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER 3° REAR-FRONT - NARROW - 7075 T6 XR363314
€34.66 (RRP inc. VAT)
#XR363315 - ALU LOWER SUSP. HOLDER 1° REAR-FRONT - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER 1° REAR-FRONT - NARROW - 7075 T6 XR363315
€34.66 (RRP inc. VAT)
#XR363316 - ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-FRONT
ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-FRONT XR363316
€33.70 (RRP inc. VAT)
#XR363320 - ALU REAR LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
ALU REAR LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM) XR363320
€25.88 (RRP inc. VAT)
#XR363321 - ALU REAR LOWER SUSP. HOLDER +2 - REAR - 7075 T6 (5MM)
ALU REAR LOWER SUSP. HOLDER +2 - REAR - 7075 T6 (5MM) XR363321
€25.88 (RRP inc. VAT)
#XR363324 - ALU LOWER SUSP. HOLDER REAR-REAR - NARROW - 7075 T6
ALU LOWER SUSP. HOLDER REAR-REAR - NARROW - 7075 T6 XR363324
€34.66 (RRP inc. VAT)
#XR363325 - ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-REAR
ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-REAR XR363325
€33.70 (RRP inc. VAT)
#XR363350 - COMPOSITE UPRIGHT REAR - V2
COMPOSITE UPRIGHT REAR - V2 XR363350
€7.10 (RRP inc. VAT)
#XR363352 - ALU REAR UPRIGHT - LEFT
ALU REAR UPRIGHT - LEFT XR363352
€32.47 (RRP inc. VAT)
#XR363353-G - COMPOSITE UPRIGHT REAR - GRAPHITE
COMPOSITE UPRIGHT REAR - GRAPHITE XR363353-G
€11.53 (RRP inc. VAT)
#XR363353-H - COMPOSITE UPRIGHT REAR - HARD
COMPOSITE UPRIGHT REAR - HARD XR363353-H
€8.39 (RRP inc. VAT)
#XR363510 - LEXAN REAR WING (2)
LEXAN REAR WING (2) XR363510
€11.28 (RRP inc. VAT)
#XR363511 - LEXAN REAR WING 1.5MM (2)
LEXAN REAR WING 1.5MM (2) XR363511
€14.12 (RRP inc. VAT)
#XR363520 - REAR WING POST - V2 (2)
REAR WING POST - V2 (2) XR363520
€8.65 (RRP inc. VAT)
#XR364010 - ALU MOTOR BULKHEAD
ALU MOTOR BULKHEAD XR364010
€54.50 (RRP inc. VAT)
#XR364011 - ALU MOTOR BULKHEAD
ALU MOTOR BULKHEAD XR364011
€54.50 (RRP inc. VAT)
#XR364012 - ALU MOTOR BULKHEAD
ALU MOTOR BULKHEAD XR364012
€44.17 (RRP inc. VAT)
#XR364013 - ALU MOTOR BULKHEAD - LOW
ALU MOTOR BULKHEAD - LOW XR364013
€54.50 (RRP inc. VAT)
#XR364014 - ALU MOTOR BULKHEAD - NARROW
ALU MOTOR BULKHEAD - NARROW XR364014
€49.56 (RRP inc. VAT)
#XR364020 - COMPOSITE CENTRAL BULKHEAD
COMPOSITE CENTRAL BULKHEAD XR364020
€12.97 (RRP inc. VAT)
#XR364022 - COMPOSITE CENTRAL BULKHEAD
COMPOSITE CENTRAL BULKHEAD XR364022
€12.97 (RRP inc. VAT)
#XR364023 - COMPOSITE CENTRAL BULKHEAD - LOW
COMPOSITE CENTRAL BULKHEAD - LOW XR364023
€12.97 (RRP inc. VAT)
#XR364024 - ALU CENTRAL BULKHEAD - LOW
ALU CENTRAL BULKHEAD - LOW XR364024
€23.33 (RRP inc. VAT)
#XR364025 - XB4C'22 ALU CENTRAL BULKHEAD - SWISS 7075 T6
XB4C'22 ALU CENTRAL BULKHEAD - SWISS 7075 T6 XR364025
€30.24 (RRP inc. VAT)
#XR364090 - ALU ECCENTRIC MOTOR BULKHEAD INSERT - V3
ALU ECCENTRIC MOTOR BULKHEAD INSERT - V3 XR364090
€19.07 (RRP inc. VAT)
#XR364091 - ALU ECCENTRIC INSERT FOR NARROW MOTOR BULKHEAD
ALU ECCENTRIC INSERT FOR NARROW MOTOR BULKHEAD XR364091
€19.63 (RRP inc. VAT)
#XR364100 - XB4 MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - SET
XB4 MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - SET XR364100
€99.36 (RRP inc. VAT)
#XR364101 - ONE-WAY SLIPPER CLUTCH SET
ONE-WAY SLIPPER CLUTCH SET XR364101
€93.60 (RRP inc. VAT)
#XR364102 - XB4 SOLID AXLE - SET
XB4 SOLID AXLE - SET XR364102
€63.00 (RRP inc. VAT)
#XR364110 - SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™
SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™ XR364110
€24.16 (RRP inc. VAT)
#XR364111 - SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™
SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™ XR364111
€26.78 (RRP inc. VAT)
#XR364112 - 3-PAD SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™
3-PAD SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™ XR364112
€32.14 (RRP inc. VAT)
#XR364113 - 3-PAD SLIPPER CLUTCH SHAFT - NARROW - HUDY SPRING STEEL™
3-PAD SLIPPER CLUTCH SHAFT - NARROW - HUDY SPRING STEEL™ XR364113
€36.50 (RRP inc. VAT)
#XR364115 - 3-PAD SHAFT FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - HUDY SPRING STEEL™
3-PAD SHAFT FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - HUDY SPRING STEEL™ XR364115
€22.03 (RRP inc. VAT)
#XR364116 - ONE-WAY SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™
ONE-WAY SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL™ XR364116
€40.32 (RRP inc. VAT)
#XR364120 - ALU SLIPPER CLUTCH PLATE - 7075 T6 HARD COATED - LIGHTWEIGHT
ALU SLIPPER CLUTCH PLATE - 7075 T6 HARD COATED - LIGHTWEIGHT XR364120
€17.28 (RRP inc. VAT)
#XR364121 - ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - 7075 T6 HARD COATED
ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - 7075 T6 HARD COATED XR364121
€18.85 (RRP inc. VAT)
#XR364122 - ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - FRONT - 7075 T6 HARD COATED
ALU PLATE FOR  MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - FRONT - 7075 T6 HARD COATED XR364122
€19.09 (RRP inc. VAT)
#XR364123 - ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - REAR - 7075 T6 HARD COATED
ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - REAR - 7075 T6 HARD COATED XR364123
€19.58 (RRP inc. VAT)
#XR364124 - ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - FRONT - SWISS 7075 T6
ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - FRONT - SWISS 7075 T6 XR364124
€18.19 (RRP inc. VAT)
#XR364125 - ALU PLATE FOR ONE-WAY SLIPPER CLUTCH FOR OUTDRIVE - SWISS 7075 T6
ALU PLATE FOR ONE-WAY SLIPPER CLUTCH FOR OUTDRIVE - SWISS 7075 T6 XR364125
€18.19 (RRP inc. VAT)
#XR364126 - ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6
ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6 XR364126
€20.16 (RRP inc. VAT)
#XR364130 - SLIPPER CLUTCH PAD (2)
SLIPPER CLUTCH PAD (2) XR364130
€10.51 (RRP inc. VAT)
#XR364130-L - ALU ONE-WAY SLIPPER CLUTCH PLATES - VENTILATED - SET
ALU ONE-WAY SLIPPER CLUTCH PLATES - VENTILATED - SET XR364130-L
€39.60 (RRP inc. VAT)
#XR364131 - SLIPPER CLUTCH PAD SLS - SOFT (3)
SLIPPER CLUTCH PAD SLS - SOFT (3) XR364131
€21.00 (RRP inc. VAT)
#XR364132 - SLIPPER CLUTCH PAD BLACK - MEDIUM (2)
SLIPPER CLUTCH PAD BLACK - MEDIUM (2) XR364132
€14.69 (RRP inc. VAT)
#XR364133 - SLIPPER CLUTCH ONE-WAY OUTDRIVE PAD SLS - SOFT (2)
SLIPPER CLUTCH ONE-WAY OUTDRIVE PAD SLS - SOFT (2) XR364133
€15.10 (RRP inc. VAT)
#XR364140 - ALU 3-PAD SLIPPER CLUTCH PLATE DISC - 7075 T6 HARD COATED
ALU 3-PAD SLIPPER CLUTCH PLATE DISC - 7075 T6 HARD COATED XR364140
€17.54 (RRP inc. VAT)
#XR364141 - ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - CENTER - 7075 T6 HARD COATED
ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - CENTER - 7075 T6 HARD COATED XR364141
€18.36 (RRP inc. VAT)
#XR364150 - ALU SLIPPER CLUTCH NUT RETAINER
ALU SLIPPER CLUTCH NUT RETAINER XR364150
€9.16 (RRP inc. VAT)
#XR364151 - STEEL BUSHING FOR ONE-WAY SLIPPER CLUTCH
STEEL BUSHING FOR ONE-WAY SLIPPER CLUTCH XR364151
€8.47 (RRP inc. VAT)
#XR364160 - SCREW FOR ONE-WAY SLIPPER CLUTCH ADJUSTMENT - HUDY SPRING STEEL™
SCREW FOR ONE-WAY SLIPPER CLUTCH ADJUSTMENT - HUDY SPRING STEEL™ XR364160
€8.47 (RRP inc. VAT)
#XR364170 - SLIPPER CLUTCH OUTDRIVE ADAPTER - HUDY SPRING STEEL™
SLIPPER CLUTCH OUTDRIVE ADAPTER - HUDY SPRING STEEL™ XR364170
€18.19 (RRP inc. VAT)
#XR364171 - SLIPPER CLUTCH OUTDRIVE ADAPTER - HUDY SPRING STEEL™
SLIPPER CLUTCH OUTDRIVE ADAPTER - HUDY SPRING STEEL™ XR364171
€24.16 (RRP inc. VAT)
#XR364172 - SLIPPER CLUTCH OUTDRIVE ADAPTER - NARROW - HUDY SPRING STEEL™
SLIPPER CLUTCH OUTDRIVE ADAPTER - NARROW - HUDY SPRING STEEL™ XR364172
€24.16 (RRP inc. VAT)
#XR364173 - OUTDRIVE ADAPTER FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - REAR - HUDY SPRING STEEL™
OUTDRIVE ADAPTER FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - REAR - HUDY SPRING STEEL™ XR364173
€26.60 (RRP inc. VAT)
#XR364174 - OUTDRIVE ADAPTER FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - FRONT - HUDY SPRING STEEL™
OUTDRIVE ADAPTER FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - FRONT - HUDY SPRING STEEL™ XR364174
€26.60 (RRP inc. VAT)
#XR364175 - OUTDRIVE ADAPTER WITH PRESSED ONE-WAY BEARING - HUDY SPRING STEEL™
OUTDRIVE ADAPTER WITH PRESSED ONE-WAY BEARING - HUDY SPRING STEEL™ XR364175
€30.24 (RRP inc. VAT)
#XR364176 - SOLID AXLE OUTDRIVE ADAPTER - HUDY SPRING STEEL™
SOLID AXLE OUTDRIVE ADAPTER - HUDY SPRING STEEL™ XR364176
€24.16 (RRP inc. VAT)