All Items
Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (86), Ball joint (58), battery (78), Battery holder (27), Bearing (130), Belt (93), Bevel gear (18), Body mount parts (18), Body post (26), Brake (56), Bulkhead (210), Bumper (70), C-Hub (85), Chassis (286), Clip (36), Clutch (142), CVD (53), Damper (2), deck (88), Diff (176), Drive shaft (167), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (11), Flywheel (23), Fuel Tank / tube (7), Hex (150), Impact (1), Layshaft (22), M3 (87), M4 (24), Motor Holder (4), O-ring (49), Pin (180), Pinion gear (133), Pivot Ball (50), Pivot Pin (53), Pulley (69), Radio plate / RX box (11), Rear hub (12), Rear Wing (40), Servo (191), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (306), Shim (128), Shock parts (69), Shock tower (114), Soft (47), Spring (501), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (65), Upper/Top Deck (18), Upright (39), weight (56), Wheel hub (40)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#DY164040 - PHILLIPS SCREWDRIVER 4.0 x 120 MM / 18MM (SCREW 2.9 & M3) - V2
PHILLIPS SCREWDRIVER  4.0 x 120 MM / 18MM (SCREW 2.9 & M3) - V2 DY164040
€19.48 (RRP inc. VAT)
#DY164041 - PHILLIPS SCREWDRIVER REPLACEMENT TIP 4.0 x 120 MM
PHILLIPS SCREWDRIVER REPLACEMENT TIP  4.0 x 120 MM DY164041
€11.80 (RRP inc. VAT)
#DY164045 - LIMITED EDITION - PHILLIPS SCREWDRIVER 4.0 MM
LIMITED EDITION - PHILLIPS SCREWDRIVER 4.0 MM DY164045
€20.98 (RRP inc. VAT)
#DY164049 - PT PHILLIPS SCREWDRIVER 4.0 x 120 MM (SCREW 2.9 & M3) - V2
PT PHILLIPS SCREWDRIVER  4.0 x 120 MM (SCREW 2.9 & M3) - V2 DY164049
€15.62 (RRP inc. VAT)
#DY164071 - POWER TOOL TIP PHILLIPS 4.0 x 90 MM
POWER TOOL TIP PHILLIPS 4.0 x 90 MM DY164071
€10.68 (RRP inc. VAT)
#DY165000 - PHILLIPS SCREWDRIVER 5.0 x 120 MM / 22MM (SCREW 3.5 & M4) - V2
PHILLIPS SCREWDRIVER  5.0 x 120 MM / 22MM (SCREW 3.5 & M4) - V2 DY165000
€20.77 (RRP inc. VAT)
#DY165005 - LIMITED EDITION - PHILLIPS SCREWDRIVER 5.0 x 120 MM / 22MM (SCREW 3.5 & M4)
LIMITED EDITION - PHILLIPS SCREWDRIVER  5.0 x 120 MM / 22MM (SCREW 3.5 & M4) DY165005
€22.75 (RRP inc. VAT)
#DY165040 - PHILLIPS SCREWDRIVER 5.0 x 120 MM / 18MM (SCREW 3.5 & M4) - V2
PHILLIPS SCREWDRIVER  5.0 x 120 MM / 18MM (SCREW 3.5 & M4) - V2 DY165040
€20.77 (RRP inc. VAT)
#DY165849 - PT PHILLIPS SCREWDRIVER 5.8 x 120 MM (SCREW 4.2 & M5) - V2
PT PHILLIPS SCREWDRIVER  5.8 x 120 MM (SCREW 4.2 & M5) - V2 DY165849
€18.85 (RRP inc. VAT)
#DY165871 - POWER TOOL TIP PHILLIPS 5.8 x 90 MM
POWER TOOL TIP PHILLIPS 5.8 x 90 MM DY165871
€10.68 (RRP inc. VAT)
#DY170004 - HUDY SHORT SOCKET WRENCH # 5.5MM
HUDY SHORT SOCKET WRENCH # 5.5MM DY170004
€11.88 (RRP inc. VAT)
#DY170005 - SOCKET DRIVER 5 MM & 5.5 MM
SOCKET DRIVER 5 MM & 5.5 MM DY170005
€14.42 (RRP inc. VAT)
#DY170007 - LIMITED EDITION - ALU 1-PIECE SOCKET DRIVER 7.0 MM
LIMITED EDITION - ALU 1-PIECE SOCKET DRIVER 7.0 MM DY170007
€15.44 (RRP inc. VAT)
#DY170049 - PT SOCKET DRIVER 4.5 MM - V2
PT SOCKET DRIVER 4.5 MM - V2 DY170049
€17.03 (RRP inc. VAT)
#DY170058 - PT SOCKET DRIVER 5.0 MM - V2
PT SOCKET DRIVER 5.0 MM - V2 DY170058
€17.03 (RRP inc. VAT)
#DY170059 - PT SOCKET DRIVER 5.5 MM - V2
PT SOCKET DRIVER 5.5 MM - V2 DY170059
€17.03 (RRP inc. VAT)
#DY170060 - SOCKET DRIVER 6.0 MM - V2
SOCKET DRIVER 6.0 MM - V2 DY170060
€20.77 (RRP inc. VAT)
#DY170069 - PT SOCKET DRIVER 6.0 MM - V2
PT SOCKET DRIVER 6.0 MM - V2 DY170069
€17.03 (RRP inc. VAT)
#DY170079 - PT SOCKET DRIVER 7.0 MM
PT SOCKET DRIVER 7.0 MM DY170079
€14.80 (RRP inc. VAT)
#DY170089 - PT SOCKET DRIVER 8.0 MM
PT SOCKET DRIVER 8.0 MM DY170089
€17.03 (RRP inc. VAT)
#DY170104 - SOCKET DRIVER 1/4" (6.35 MM) - V2
SOCKET DRIVER 1/4" (6.35 MM) - V2 DY170104
€20.77 (RRP inc. VAT)
#DY170109 - PT SOCKET DRIVER 1/4" (6.35 MM) - V2
PT SOCKET DRIVER 1/4" (6.35 MM) - V2 DY170109
€17.03 (RRP inc. VAT)
#DY170308 - SOCKET DRIVER 3/8" (9.525 MM) - V2
SOCKET DRIVER 3/8" (9.525 MM) - V2 DY170308
€22.93 (RRP inc. VAT)
#DY170309 - PT SOCKET DRIVER 3/8" (9.525 MM)
PT SOCKET DRIVER 3/8" (9.525 MM) DY170309
€17.03 (RRP inc. VAT)
#DY170316 - SOCKET DRIVER 3/16" (4.763 MM) - V2
SOCKET DRIVER 3/16" (4.763 MM) - V2 DY170316
€20.77 (RRP inc. VAT)
#DY170319 - PT SOCKET DRIVER 3/16" (4.763 MM) - V2
PT SOCKET DRIVER 3/16" (4.763 MM) - V2 DY170319
€17.03 (RRP inc. VAT)
#DY171132 - SOCKET DRIVER 11/32
SOCKET DRIVER 11/32 DY171132
€22.93 (RRP inc. VAT)
#DY171139 - PT SOCKET DRIVER 11/32" (8.731 MM)
PT SOCKET DRIVER 11/32" (8.731 MM) DY171139
€17.03 (RRP inc. VAT)
#DY175035 - LIMITED EDITION - SOCKET DRIVER 5.0 MM
LIMITED EDITION - SOCKET DRIVER 5.0 MM DY175035
€25.24 (RRP inc. VAT)
#DY175535 - LIMITED EDITION - SOCKET DRIVER 5.5 MM
LIMITED EDITION - SOCKET DRIVER 5.5 MM DY175535
€22.09 (RRP inc. VAT)
#DY175571 - POWER TOOL TIP SOCKET 5.5 x 90 MM
POWER TOOL TIP SOCKET 5.5 x 90 MM DY175571
€10.68 (RRP inc. VAT)
#DY177035 - LIMITED EDITION - SOCKET DRIVER 7.0 MM
LIMITED EDITION - SOCKET DRIVER 7.0 MM DY177035
€22.09 (RRP inc. VAT)
#DY177071 - POWER TOOL TIP SOCKET 7.0 x 90 MM
POWER TOOL TIP SOCKET 7.0 x 90 MM DY177071
€10.68 (RRP inc. VAT)
#DY181030 - HUDY SPRING STEEL TURNBUCKLE WRENCH 3MM
HUDY SPRING STEEL TURNBUCKLE WRENCH 3MM DY181030
€10.58 (RRP inc. VAT)
#DY181031 - ALU TURNBUCKLE WRENCH 3MM - SWISS 7075 T6
ALU TURNBUCKLE WRENCH 3MM - SWISS 7075 T6 DY181031
€11.88 (RRP inc. VAT)
#DY181034 - HUDY SPRING STEEL TURNBUCKLE WRENCH 3 & 4MM
HUDY SPRING STEEL TURNBUCKLE WRENCH 3 & 4MM DY181034
€14.98 (RRP inc. VAT)
#DY181040 - HUDY SPRING STEEL TURNBUCKLE WRENCH 4MM
HUDY SPRING STEEL TURNBUCKLE WRENCH 4MM DY181040
€10.58 (RRP inc. VAT)
#DY181041 - ALU TURNBUCKLE WRENCH 4MM - SWISS 7075 T6
ALU TURNBUCKLE WRENCH 4MM - SWISS 7075 T6 DY181041
€11.88 (RRP inc. VAT)
#DY181050 - HUDY SPRING STEEL TURNBUCKLE WRENCH 5MM
HUDY SPRING STEEL TURNBUCKLE WRENCH 5MM DY181050
€10.58 (RRP inc. VAT)
#DY181055 - HUDY SPRING STEEL TURNBUCKLE WRENCH 5.5MM
HUDY SPRING STEEL TURNBUCKLE WRENCH 5.5MM DY181055
€12.17 (RRP inc. VAT)
#DY181060 - HUDY SPRING STEEL TURNBUCKLE WRENCH 6MM
HUDY SPRING STEEL TURNBUCKLE WRENCH 6MM DY181060
€12.17 (RRP inc. VAT)
#DY181090 - HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS
HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS DY181090
€6.73 (RRP inc. VAT)
#DY181091 - HUDY TURNBUCKLE WRENCH 3 & 4MM - V2
HUDY TURNBUCKLE WRENCH 3 & 4MM - V2 DY181091
€4.68 (RRP inc. VAT)
#DY181110 - HUDY BALL JOINT WRENCH
HUDY BALL JOINT WRENCH DY181110
€15.54 (RRP inc. VAT)
#DY182005 - HUDY ON-ROAD CLUTCH SPRING TOOL
HUDY ON-ROAD CLUTCH SPRING TOOL DY182005
€15.44 (RRP inc. VAT)
#DY182010 - HUDY FLYWHEEL/CLUTCH MULTI-TOOL
HUDY FLYWHEEL/CLUTCH MULTI-TOOL DY182010
€44.17 (RRP inc. VAT)
#DY182016 - HUDY WHEEL NUT & 3/4 SHOE FLYWHEEL MULTI-TOOL 1/8 BUGGY & GT
HUDY WHEEL NUT & 3/4 SHOE FLYWHEEL MULTI-TOOL 1/8 BUGGY & GT DY182016
€40.42 (RRP inc. VAT)
#DY183001 - HUDY PROFESSIONAL BULKHEAD ALIGNMENT TOOL 17MM - vyssie naklady
HUDY PROFESSIONAL BULKHEAD ALIGNMENT TOOL 17MM - vyssie naklady DY183001
€28.08 (RRP inc. VAT)
#DY183011 - HUDY PROFESSIONAL MULTI TOOL
HUDY PROFESSIONAL MULTI TOOL DY183011
€61.66 (RRP inc. VAT)
#DY183013 - SET OF REPLACEMENT PINS FOR HUDY PROFESSIONAL MULTI TOOL (1+1)
SET OF REPLACEMENT PINS FOR HUDY PROFESSIONAL MULTI TOOL (1+1) DY183013
€10.20 (RRP inc. VAT)
#DY188970 - HUDY PROFESSIONAL TWEEZERS STRAIGHT
HUDY PROFESSIONAL TWEEZERS STRAIGHT DY188970
€11.88 (RRP inc. VAT)
#DY188971 - HUDY PROFESSIONAL TWEEZERS CURVED
HUDY PROFESSIONAL TWEEZERS CURVED DY188971
€11.88 (RRP inc. VAT)
#DY188980 - HUDY BLADE HOBBY KNIFE WITH ALU HANDLE
HUDY BLADE HOBBY KNIFE WITH ALU HANDLE DY188980
€11.88 (RRP inc. VAT)
#DY188981 - HUDY POCKET HOBBY KNIFE
HUDY POCKET HOBBY KNIFE DY188981
€22.09 (RRP inc. VAT)
#DY188984 - HUDY REPLACEABLE HOBBY KNIFE BLADES (10PCS)
HUDY REPLACEABLE HOBBY KNIFE BLADES (10PCS) DY188984
€8.64 (RRP inc. VAT)
#DY188985 - HUDY REPLACEABLE HOBBY KNIFE BLADES (5PCS)
HUDY REPLACEABLE HOBBY KNIFE BLADES (5PCS) DY188985
€3.92 (RRP inc. VAT)
#DY188990 - HUDY PROFFESIONAL BODY SCISSORS
HUDY PROFFESIONAL BODY SCISSORS DY188990
€22.09 (RRP inc. VAT)
#DY190004 - SET OF TOOLS + CARRYING BAG - FOR ALL CARS
SET OF TOOLS + CARRYING BAG - FOR ALL CARS DY190004
€344.69 (RRP inc. VAT)
#DY190005 - HUDY LIMITED EDITION TOOL SET + CARRYING BAG
HUDY LIMITED EDITION TOOL SET + CARRYING BAG DY190005
€268.10 (RRP inc. VAT)
#DY190070 - SET OF POWER TOOL TIPS 2.0, 2.5, 3.00MM + 4.0, 5.8 PHILLIPS
SET OF POWER TOOL TIPS 2.0, 2.5, 3.00MM + 4.0, 5.8 PHILLIPS DY190070
€33.14 (RRP inc. VAT)
#DY190100 - ALLEN DRIVER SET - 8 PCS.
ALLEN DRIVER SET - 8 PCS. DY190100
€127.21 (RRP inc. VAT)
#DY190130 - BALL DRIVER SET - 4 PCS.
BALL DRIVER SET - 4 PCS. DY190130
€74.12 (RRP inc. VAT)
#DY190150 - SCREWDRIVER & PHILLIPS SET - 5 PCS.
SCREWDRIVER & PHILLIPS SET - 5 PCS. DY190150
€95.47 (RRP inc. VAT)
#DY190170 - SOCKET DRIVER METRIC SET - 6 PCS.
SOCKET DRIVER METRIC SET - 6 PCS. DY190170
€123.73 (RRP inc. VAT)
#DY190171 - SOCKET DRIVER INCH SET - 5 PCS.
SOCKET DRIVER INCH SET - 5 PCS. DY190171
€109.61 (RRP inc. VAT)
#DY190210 - BASIC SET - 9 PCS.
BASIC SET - 9 PCS. DY190210
€180.28 (RRP inc. VAT)
#DY195000 - PLASTIC CAP FOR HANDLE ( SET - 3+2+1) BLACK
PLASTIC CAP FOR HANDLE ( SET -  3+2+1) BLACK DY195000
€8.81 (RRP inc. VAT)
#DY195010 - PLASTIC CAP FOR HANDLE ( SET - 3+2+1) VIOLET
PLASTIC CAP FOR HANDLE ( SET -  3+2+1) VIOLET DY195010
€8.81 (RRP inc. VAT)
#DY195020 - PLASTIC CAP FOR HANDLE ( SET - 3+2+1) RED
PLASTIC CAP FOR HANDLE ( SET -  3+2+1) RED DY195020
€8.81 (RRP inc. VAT)
#DY195030 - PLASTIC CAP FOR HANDLE ( SET - 3+2+1) BLUE
PLASTIC CAP FOR HANDLE ( SET -  3+2+1) BLUE DY195030
€8.81 (RRP inc. VAT)
#DY195040 - PLASTIC CAP FOR HANDLE ( SET - 3+2+1) PURPLE
PLASTIC CAP FOR HANDLE ( SET -  3+2+1) PURPLE DY195040
€8.81 (RRP inc. VAT)
#DY195054-B - CAP FOR 14MM HANDLE - BLUE (6)
CAP FOR 14MM HANDLE - BLUE (6) DY195054-B
€8.81 (RRP inc. VAT)
#DY195054-K - CAP FOR 14MM HANDLE - BLACK (6)
CAP FOR 14MM HANDLE - BLACK (6) DY195054-K
€8.81 (RRP inc. VAT)
#DY195054-R - CAP FOR 14MM HANDLE - RED (6)
CAP FOR 14MM HANDLE - RED (6) DY195054-R
€8.81 (RRP inc. VAT)
#DY195054-V - CAP FOR 14MM HANDLE - VIOLET (6)
CAP FOR 14MM HANDLE - VIOLET (6) DY195054-V
€8.81 (RRP inc. VAT)
#DY195058-B - CAP FOR 18MM HANDLE - BLUE (6)
CAP FOR 18MM HANDLE - BLUE (6) DY195058-B
€8.81 (RRP inc. VAT)
#DY195058-K - CAP FOR 18MM HANDLE - BLACK (6)
CAP FOR 18MM HANDLE - BLACK (6) DY195058-K
€8.81 (RRP inc. VAT)
#DY195058-R - CAP FOR 18MM HANDLE - RED (6)
CAP FOR 18MM HANDLE - RED (6) DY195058-R
€8.81 (RRP inc. VAT)
#DY195058-V - CAP FOR 18MM HANDLE - VIOLET (6)
CAP FOR 18MM HANDLE - VIOLET (6) DY195058-V
€8.81 (RRP inc. VAT)
#DY195062-B - CAP FOR 22MM HANDLE - BLUE (6)
CAP FOR 22MM HANDLE - BLUE (6) DY195062-B
€8.81 (RRP inc. VAT)
#DY195062-K - CAP FOR 22MM HANDLE - BLACK (6)
CAP FOR 22MM HANDLE - BLACK (6) DY195062-K
€8.81 (RRP inc. VAT)
#DY195062-R - CAP FOR 22MM HANDLE - RED (6)
CAP FOR 22MM HANDLE - RED (6) DY195062-R
€8.81 (RRP inc. VAT)
#DY195062-V - CAP FOR 22MM HANDLE - VIOLET (6)
CAP FOR 22MM HANDLE - VIOLET (6) DY195062-V
€8.81 (RRP inc. VAT)
#DY199010 - HUDY RC TOOLS BAG - EXCLUSIVE EDITION
HUDY RC TOOLS BAG - EXCLUSIVE EDITION DY199010
€39.61 (RRP inc. VAT)
#DY199011 - HUDY RC TOOLS BAG - COMPACT - EXCLUSIVE EDITION
HUDY RC TOOLS BAG - COMPACT - EXCLUSIVE EDITION DY199011
€33.02 (RRP inc. VAT)
#DY199060 - HUDY ALU TOOL STAND
HUDY ALU TOOL STAND DY199060
€73.01 (RRP inc. VAT)
#DY199080 - ZIPPER PULLER (2)
ZIPPER PULLER (2) DY199080
€3.61 (RRP inc. VAT)
#DY199087 - HUDY TOURING CARRYING BAG DRAWER - SMALL
HUDY TOURING CARRYING BAG DRAWER  - SMALL DY199087
€14.98 (RRP inc. VAT)
#DY199090 - WHEELS FOR CARGO & TRAVEL BAG
WHEELS FOR CARGO & TRAVEL BAG DY199090
€34.27 (RRP inc. VAT)
#DY199091 - HUDY CARRYING BAG DRAWER - LARGE
HUDY CARRYING BAG DRAWER - LARGE DY199091
€19.85 (RRP inc. VAT)
#DY199092 - HUDY CARRYING BAG DRAWER - SMALL
HUDY CARRYING BAG DRAWER - SMALL DY199092
€18.12 (RRP inc. VAT)
#DY199094 - TELESCOPIC HANDLE WITH PUSH BUTTON FOR 199150
TELESCOPIC HANDLE WITH PUSH BUTTON FOR 199150 DY199094
€20.58 (RRP inc. VAT)
#DY199095 - ALU TELESCOPIC HANDLE 810MM WITH PUSH BUTTON FOR 199155L
ALU TELESCOPIC HANDLE 810MM WITH PUSH BUTTON FOR 199155L DY199095
€28.22 (RRP inc. VAT)
#DY199096 - FEET FOR CARRYING BAG
FEET FOR CARRYING BAG DY199096
€4.67 (RRP inc. VAT)
#DY199097 - TROLLEY ALU RODS + BRACE
TROLLEY ALU RODS + BRACE DY199097
€16.44 (RRP inc. VAT)
#DY199098 - WHEELS FOR CARRYING BAG
WHEELS FOR CARRYING BAG DY199098
€17.36 (RRP inc. VAT)
#DY199099 - TELESCOPIC HANDLE WITH PUSH BUTTON
TELESCOPIC HANDLE WITH PUSH BUTTON DY199099
€13.99 (RRP inc. VAT)
#DY199110 - HUDY 1/10 CARRYING BAG - COMPACT
HUDY 1/10 CARRYING BAG - COMPACT DY199110
€112.32 (RRP inc. VAT)
#DY199140 - HUDY 1/8 OFF-ROAD & TRUGGY CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION
HUDY 1/8 OFF-ROAD & TRUGGY CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION DY199140
€324.00 (RRP inc. VAT)
#DY199150 - HUDY CARGO BAG - EXCLUSIVE EDITION
HUDY CARGO BAG - EXCLUSIVE EDITION DY199150
€296.38 (RRP inc. VAT)