All Items
Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (86), Ball joint (58), battery (78), Battery holder (27), Bearing (130), Belt (93), Bevel gear (18), Body mount parts (18), Body post (26), Brake (56), Bulkhead (210), Bumper (70), C-Hub (85), Chassis (286), Clip (36), Clutch (142), CVD (53), Damper (2), deck (88), Diff (176), Drive shaft (167), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (11), Flywheel (23), Fuel Tank / tube (7), Hex (150), Impact (1), Layshaft (22), M3 (87), M4 (24), Motor Holder (4), O-ring (49), Pin (180), Pinion gear (133), Pivot Ball (50), Pivot Pin (53), Pulley (69), Radio plate / RX box (11), Rear hub (12), Rear Wing (40), Servo (191), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (306), Shim (128), Shock parts (69), Shock tower (114), Soft (47), Spring (501), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (65), Upper/Top Deck (18), Upright (39), weight (56), Wheel hub (40)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR372325 - X1 ALU 1 DOT BUSHING - CAMBER 1.5-2 (2)
X1 ALU 1 DOT BUSHING - CAMBER 1.5-2 (2) XR372325
€15.06 (RRP inc. VAT)
#XR372326 - X1 ALU 1 DOT BUSHING - CAMBER 1-2.5 (2)
X1 ALU 1 DOT BUSHING - CAMBER 1-2.5 (2) XR372326
€12.20 (RRP inc. VAT)
#XR372327 - X1 ALU 1 DOT BUSHING - CASTER 6-9 (3)
X1 ALU 1 DOT BUSHING - CASTER 6-9 (3) XR372327
€22.74 (RRP inc. VAT)
#XR372328 - X1 ALU 1 DOT BUSHING - CASTER 3-12 (3)
X1 ALU 1 DOT BUSHING - CASTER 3-12 (3) XR372328
€22.74 (RRP inc. VAT)
#XR372330-O - X12 US ALU BUSHING - CENTRIC (2)
X12 US ALU BUSHING - CENTRIC (2) XR372330-O
€15.06 (RRP inc. VAT)
#XR372331-O - X12 US ALU ECCENTRIC BUSHING - WIDTH 0.5MM (2)
X12 US ALU ECCENTRIC BUSHING - WIDTH 0.5MM (2) XR372331-O
€15.06 (RRP inc. VAT)
#XR372332-O - X12 US ALU ECCENTRIC BUSHING - WIDTH 1.0MM (2)
X12 US ALU ECCENTRIC BUSHING - WIDTH 1.0MM (2) XR372332-O
€15.06 (RRP inc. VAT)
#XR372410 - X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - ORANGE
X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - ORANGE XR372410
€15.47 (RRP inc. VAT)
#XR372410-K - X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - BLACK
X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - BLACK XR372410-K
€14.03 (RRP inc. VAT)
#XR372450 - ALU ANTI-ROLL BAR PIVOT BALL 4.9 MM (2)
ALU ANTI-ROLL BAR PIVOT BALL 4.9 MM (2) XR372450
€13.45 (RRP inc. VAT)
#XR372481 - ANTI-ROLL BAR - FRONT 1.1 MM
ANTI-ROLL BAR - FRONT 1.1 MM XR372481
€9.94 (RRP inc. VAT)
#XR372482 - ANTI-ROLL BAR - FRONT 1.2 MM
ANTI-ROLL BAR - FRONT 1.2 MM XR372482
€9.94 (RRP inc. VAT)
#XR372491 - ANTI-ROLL BAR - FRONT 1.1 MM
ANTI-ROLL BAR - FRONT 1.1 MM XR372491
€9.94 (RRP inc. VAT)
#XR372492 - ANTI-ROLL BAR - FRONT 1.2 MM
ANTI-ROLL BAR - FRONT 1.2 MM XR372492
€9.94 (RRP inc. VAT)
#XR372493 - ANTI-ROLL BAR - FRONT 1.3 MM
ANTI-ROLL BAR - FRONT 1.3 MM XR372493
€9.94 (RRP inc. VAT)
#XR372494 - ANTI-ROLL BAR - FRONT 1.4 MM
ANTI-ROLL BAR - FRONT 1.4 MM XR372494
€9.94 (RRP inc. VAT)
#XR372503 - COMPOSITE SERVO SAVER - X-STIFF - SET - V2
COMPOSITE SERVO SAVER - X-STIFF - SET - V2 XR372503
€20.22 (RRP inc. VAT)
#XR372540 - X1 COMPOSITE STEERING ARM
X1 COMPOSITE STEERING ARM XR372540
€6.43 (RRP inc. VAT)
#XR372541-K - X1 ALU ADJUSTABLE SERVO SAVER SET - BLACK
X1 ALU ADJUSTABLE SERVO SAVER SET - BLACK XR372541-K
€40.32 (RRP inc. VAT)
#XR372550-K - X1 ALU STEERING PIVOT SHAFT - BLACK
X1 ALU STEERING PIVOT SHAFT - BLACK XR372550-K
€8.32 (RRP inc. VAT)
#XR372550-O - X1 ALU STEERING PIVOT SHAFT
X1 ALU STEERING PIVOT SHAFT XR372550-O
€9.16 (RRP inc. VAT)
#XR372551-O - X1 ALU STEERING PIVOT SHAFT - SHORT
X1 ALU STEERING PIVOT SHAFT - SHORT XR372551-O
€9.16 (RRP inc. VAT)
#XR372610-O - ALU ADJ. TURNBUCKLE M3x42 MM - SWISS 7075 T6 - ORANGE (2)
ALU ADJ. TURNBUCKLE M3x42 MM - SWISS 7075 T6 - ORANGE (2) XR372610-O
€15.47 (RRP inc. VAT)
#XR372615 - ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 (2) --- Replaced with #372615-O
ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 (2) --- Replaced with #372615-O XR372615
€12.53 (RRP inc. VAT)
#XR372615-K - ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 - BLACK (2)
ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 - BLACK (2) XR372615-K
€14.05 (RRP inc. VAT)
#XR372615-O - ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 - ORANGE (2)
ALU ADJ. TURNBUCKLE M3x51 MM - SWISS 7075 T6 - ORANGE (2) XR372615-O
€12.53 (RRP inc. VAT)
#XR372620 - ADJ. TURNBUCKLE M3x17 MM - HUDY SPRING STEELâ„¢ (2)
ADJ. TURNBUCKLE M3x17 MM - HUDY SPRING STEEL™ (2) XR372620
€12.32 (RRP inc. VAT)
#XR372638 - HARD STEEL BALL END 3.7MM WITH 8MM THREAD - NICKEL COATED (2)
HARD STEEL BALL END 3.7MM WITH 8MM THREAD - NICKEL COATED (2) XR372638
€9.29 (RRP inc. VAT)
#XR372649 - BALL END 4.2MM WITH 4MM THREAD (2)
BALL END 4.2MM WITH 4MM THREAD (2) XR372649
€9.04 (RRP inc. VAT)
#XR372650 - BALL END 4.2MM WITH 6MM THREAD (2)
BALL END 4.2MM WITH 6MM THREAD (2) XR372650
€9.29 (RRP inc. VAT)
#XR372651 - PIVOT BALL UNIVERSAL 4.9 MM - HUDY SPRING STEELâ„¢ (2)
PIVOT BALL UNIVERSAL 4.9 MM - HUDY SPRING STEEL™ (2) XR372651
€13.63 (RRP inc. VAT)
#XR372653 - BALL END 4.2MM WITH 8MM THREAD (2)
BALL END 4.2MM WITH 8MM THREAD (2) XR372653
€9.04 (RRP inc. VAT)
#XR372661 - COMPOSITE STEERING BALL JOINT OPEN 4.2 MM (4)
COMPOSITE STEERING BALL JOINT OPEN 4.2 MM (4) XR372661
€7.72 (RRP inc. VAT)
#XR372662 - COMPOSITE BALL JOINT 4.2 MM (4)
COMPOSITE BALL JOINT 4.2 MM (4) XR372662
€7.72 (RRP inc. VAT)
#XR372911 - X12'23 ALU REAR BULKHEAD - MOTOR - RIGHT
X12'23 ALU REAR BULKHEAD - MOTOR - RIGHT XR372911
€36.43 (RRP inc. VAT)
#XR372912 - X1'24 ALU REAR BULKHEAD - MOTOR - RIGHT
X1'24 ALU REAR BULKHEAD - MOTOR - RIGHT XR372912
€40.07 (RRP inc. VAT)
#XR372913 - X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - MOTOR - RIGHT
X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - MOTOR - RIGHT XR372913
€40.07 (RRP inc. VAT)
#XR372921 - X12'23 ALU REAR BULKHEAD - LEFT
X12'23 ALU REAR BULKHEAD - LEFT XR372921
€36.43 (RRP inc. VAT)
#XR372922 - X1'24 ALU REAR BULKHEAD - LEFT
X1'24 ALU REAR BULKHEAD - LEFT XR372922
€40.07 (RRP inc. VAT)
#XR372923 - X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - LEFT
X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - LEFT XR372923
€40.07 (RRP inc. VAT)