All Items
Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (86), Ball joint (58), battery (78), Battery holder (27), Bearing (130), Belt (93), Bevel gear (18), Body mount parts (18), Body post (26), Brake (56), Bulkhead (210), Bumper (70), C-Hub (85), Chassis (286), Clip (36), Clutch (142), CVD (53), Damper (2), deck (88), Diff (176), Drive shaft (167), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (11), Flywheel (23), Fuel Tank / tube (7), Hex (150), Impact (1), Layshaft (22), M3 (87), M4 (24), Motor Holder (4), O-ring (49), Pin (180), Pinion gear (133), Pivot Ball (50), Pivot Pin (53), Pulley (69), Radio plate / RX box (11), Rear hub (12), Rear Wing (40), Servo (191), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (306), Shim (128), Shock parts (69), Shock tower (114), Soft (47), Spring (501), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (65), Upper/Top Deck (18), Upright (39), weight (56), Wheel hub (40)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#DY298022 - HUDY TINY HARDWARE BOX - 8-COMPARTMENTS
HUDY TINY HARDWARE BOX - 8-COMPARTMENTS DY298022
€9.10 (RRP inc. VAT)
#DY298025 - HUDY PARTS CASE - 275 x 180mm
HUDY PARTS CASE - 275 x 180mm DY298025
€21.84 (RRP inc. VAT)
#DY298100 - HUDY TIN ROUND BOX 80x30MM
HUDY TIN ROUND BOX 80x30MM DY298100
€6.56 (RRP inc. VAT)
#DY332540 - ALU SERVO SAVER ADJUSTABLE NUT
ALU SERVO SAVER ADJUSTABLE NUT DY332540
€4.64 (RRP inc. VAT)
#DY803040 - HUDY 1/10 PRE-CUT SLICK TIRES RIGHT & LEFT (2+2)
HUDY 1/10 PRE-CUT SLICK TIRES RIGHT & LEFT (2+2) DY803040
€26.35 (RRP inc. VAT)
#DY803041 - 1/10 PRE-CUT SLICK BELTED TIRES RIGHT & LEFT (2+2)
1/10 PRE-CUT SLICK BELTED TIRES RIGHT & LEFT (2+2) DY803041
€23.90 (RRP inc. VAT)
#DY803053 - HUDY 1/10 TOURING CARPET TIRE C3-28 (4)
HUDY 1/10 TOURING CARPET TIRE C3-28 (4) DY803053
€24.91 (RRP inc. VAT)
#DY803072 - HUDY 1/10 FORMULA RUBBER TIRE - FRONT - V2 (2)
HUDY 1/10 FORMULA RUBBER TIRE - FRONT - V2 (2) DY803072
€21.84 (RRP inc. VAT)
#DY803082 - HUDY 1/10 FORMULA RUBBER TIRE - REAR - V2 (2)
HUDY 1/10 FORMULA RUBBER TIRE - REAR - V2 (2) DY803082
€24.36 (RRP inc. VAT)
#DY990004 - HUDY TITAN BALL STUD D=4.9 / L=4 / S=3.5 / 2mm HEX (2)
HUDY TITAN BALL STUD D=4.9 / L=4 / S=3.5 / 2mm HEX (2) DY990004
€9.00 (RRP inc. VAT)
#DY990006 - HUDY TITAN BALL STUD D=4.9 / L=6 / S=3.5 / 2mm HEX (2)
HUDY TITAN BALL STUD D=4.9 / L=6 / S=3.5 / 2mm HEX (2) DY990006
€9.00 (RRP inc. VAT)
#DY990008 - HUDY TITAN BALL STUD D=4.9 / L=8 / S=3.5 / 2mm HEX (2)
HUDY TITAN BALL STUD D=4.9 / L=8 / S=3.5 / 2mm HEX (2) DY990008
€9.00 (RRP inc. VAT)
#DY990010 - HUDY TITAN BALL STUD D=4.9 / L=10 / S=3.5 / 2mm HEX (2)
HUDY TITAN BALL STUD D=4.9 / L=10 / S=3.5 / 2mm HEX (2) DY990010
€9.00 (RRP inc. VAT)
#DY990101 - HUDY TITAN PIVOT BALL D=4.9 / S=5 / 3mm HEX (2)
HUDY TITAN PIVOT BALL D=4.9 / S=5 / 3mm HEX (2) DY990101
€9.00 (RRP inc. VAT)
#DY990102 - HUDY TITAN PIVOT BALL D=4.9 / S=3.5 / 3mm HEX (2)
HUDY TITAN PIVOT BALL D=4.9 / S=3.5 / 3mm HEX (2) DY990102
€9.00 (RRP inc. VAT)
#DY992345 - HUDY TITANIUM ADJUSTABLE TURNBUCKLE 45MM M3 L/R (2)
HUDY TITANIUM ADJUSTABLE TURNBUCKLE 45MM M3 L/R (2) DY992345
€16.20 (RRP inc. VAT)
#DY992350 - HUDY TITANIUM ADJUSTABLE TURNBUCKLE 50MM M3 L/R (2)
HUDY TITANIUM ADJUSTABLE TURNBUCKLE 50MM M3 L/R (2) DY992350
€16.56 (RRP inc. VAT)
#DY992355 - HUDY TITANIUM ADJUSTABLE TURNBUCKLE 55MM M3 L/R (2)
HUDY TITANIUM ADJUSTABLE TURNBUCKLE 55MM M3 L/R (2) DY992355
€16.92 (RRP inc. VAT)
#FX630100 - FX T300 - 3 PORTS, DLC, JAPAN BEARINGS, BALANCED
10%
OFF
FX T300 - 3 PORTS, DLC, JAPAN BEARINGS, BALANCED FX630100
€436.80 (RRP inc.VAT)
€393.12 (RRP inc. VAT)
#FX634101 - CONROD .12 - NR TYPE
CONROD .12 - NR TYPE FX634101
€41.65 (RRP inc. VAT)
#FX639550 - MUFFLER 2.1cc TOURING - EFRA 2696 + MANIFOLD - SHORT
10%
OFF
MUFFLER 2.1cc TOURING - EFRA 2696 + MANIFOLD - SHORT FX639550
€114.78 (RRP inc.VAT)
€103.31 (RRP inc. VAT)
#FX650006 - FX K303 - COMBO: ENGINE + MUFFLER 2169 + MANIFOLD - MEDIUM
FX K303 - COMBO: ENGINE + MUFFLER 2169 + MANIFOLD - MEDIUM FX650006
€532.90 (RRP inc. VAT)
#FX650105 - FX K303 - 3 PORTS, DLC, CERAMIC BEARING, BALANCED
FX K303 - 3 PORTS, DLC, CERAMIC BEARING, BALANCED FX650105
€445.54 (RRP inc. VAT)
#FX650106 - FX K303L - LINEAR - 3 PORTS, DLC, CERAMIC BEARING, BALANCED
FX K303L - LINEAR - 3 PORTS, DLC, CERAMIC BEARING, BALANCED FX650106
€437.58 (RRP inc. VAT)
#FX650304 - FX K502 - 5 PORTS, DLC, CERAMIC BEARING, BALANCED
FX K502 - 5 PORTS, DLC, CERAMIC BEARING, BALANCED FX650304
€463.01 (RRP inc. VAT)
#FX651800 - EXHAUST SEAL RING (4)
EXHAUST SEAL RING (4) FX651800
€7.78 (RRP inc. VAT)
#FX651900 - ALU CLAMP - SET
ALU CLAMP - SET FX651900
€9.18 (RRP inc. VAT)
#FX652101 - CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING
CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING FX652101
€149.76 (RRP inc. VAT)
#FX652105 - CRANKSHAFT WITH SILICONE - DIAMOND COATING
CRANKSHAFT WITH SILICONE - DIAMOND COATING FX652105
€138.24 (RRP inc. VAT)
#FX652107 - CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING
CRANKSHAFT WITH SILICONE & TUNGSTEN WEIGHT - DIAMOND COATING FX652107
€149.76 (RRP inc. VAT)
#FX652108 - K303 CRANKSHAFT WITH SILICONE & 2x TUNGSTEN WEIGHTS - DIAMOND COATING
K303 CRANKSHAFT WITH SILICONE & 2x TUNGSTEN WEIGHTS - DIAMOND COATING FX652108
€171.36 (RRP inc. VAT)
#FX653004 - K303 - 3 PORTS SLEEVE, PISTON & CONROD - MATCHED SET
K303 - 3 PORTS SLEEVE, PISTON & CONROD - MATCHED SET FX653004
€225.79 (RRP inc. VAT)
#FX653103 - 3 PORTS SLEEVE + PISTON - SET
3 PORTS SLEEVE + PISTON - SET FX653103
€149.76 (RRP inc. VAT)
#FX654100 - CONROD
CONROD FX654100
€42.88 (RRP inc. VAT)
#FX654101 - CONROD
CONROD FX654101
€46.72 (RRP inc. VAT)
#FX654901 - WRIST PIN + CLIPS
WRIST PIN + CLIPS FX654901
€9.18 (RRP inc. VAT)
#FX654902 - SHORT WRIST PIN + C-CLIPS
SHORT WRIST PIN + C-CLIPS FX654902
€10.28 (RRP inc. VAT)
#FX655007 - ENGINE HEAD - LOW PROFILE - 8 RIBS
ENGINE HEAD - LOW PROFILE - 8 RIBS FX655007
€77.87 (RRP inc. VAT)
#FX655601 - COMBUSTION CHAMBER
COMBUSTION CHAMBER FX655601
€28.64 (RRP inc. VAT)
#FX655605 - COMBUSTION CHAMBER SEALED
COMBUSTION CHAMBER SEALED FX655605
€28.64 (RRP inc. VAT)