All Items
Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Tape (1), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (86), Ball joint (58), battery (78), Battery holder (27), Bearing (130), Belt (93), Bevel gear (18), Body mount parts (18), Body post (26), Brake (56), Bulkhead (210), Bumper (70), C-Hub (85), Chassis (286), Clip (36), Clutch (142), CVD (53), Damper (2), deck (88), Diff (176), Drive shaft (167), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (11), Flywheel (23), Fuel Tank / tube (7), Hex (150), Impact (1), Layshaft (22), M3 (87), M4 (24), Motor Holder (4), O-ring (49), Pin (180), Pinion gear (133), Pivot Ball (50), Pivot Pin (53), Pulley (69), Radio plate / RX box (11), Rear hub (12), Rear Wing (40), Servo (191), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (306), Shim (128), Shock parts (69), Shock tower (114), Soft (47), Spring (501), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (65), Upper/Top Deck (18), Upright (39), weight (56), Wheel hub (40)
Scale:
18th (2)
Size:
L (5), M (4), XL (4), XXL (3), XXXL (1)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Tip Type:
Cross (13), inch (31), mixed (3), mm (40), Reamer (3), Slot (12), Torx (2)
Tool Type:
Alloy handle (29), Brush (6), Handle cap (17), LE (17), Multi (1), Power tool (10), Profi handle (26), Reamer (4), Tip only (24), Tool Set (7), Wrench (5)
Transmission:
4wd (1)
Voltage:
7.4 (3), 7.6 (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#DY107064 - COLLET 14 FOR .21 ENGINE BEARING
COLLET 14 FOR .21 ENGINE BEARING DY107064
€17.70 (RRP inc. VAT)
#DY107072 - BEARING PRESSER ADAPTER FOR .12 ENGINE - SET
BEARING PRESSER ADAPTER FOR .12 ENGINE - SET DY107072
€22.09 (RRP inc. VAT)
#DY107073 - BEARING PRESSER ADAPTER FOR .21 ENGINE - SET
BEARING PRESSER ADAPTER FOR .21 ENGINE - SET DY107073
€22.09 (RRP inc. VAT)
#DY107084 - SUPPORT BUSHING o18 FOR .12 ENGINE
SUPPORT BUSHING o18 FOR .12 ENGINE DY107084
€6.65 (RRP inc. VAT)
#DY107090 - HUDY BEARING CHECK TOOL
HUDY BEARING CHECK TOOL DY107090
€24.34 (RRP inc. VAT)
#DY107100 - PINION PRESSER - SLOT CAR
PINION PRESSER - SLOT CAR DY107100
€53.06 (RRP inc. VAT)
#DY107150 - HUDY GRAPHITE PINION CADDY
HUDY GRAPHITE PINION CADDY DY107150
€28.73 (RRP inc. VAT)
#DY107570 - HUDY 17MM OFF-ROAD WHEEL NUT TOOL
HUDY 17MM OFF-ROAD WHEEL NUT TOOL DY107570
€44.17 (RRP inc. VAT)
#DY107581 - CROSS WRENCH GLOWPLUG # 8MM / CLUTCHNUT # 10MM - LONG
CROSS WRENCH GLOWPLUG # 8MM / CLUTCHNUT # 10MM - LONG DY107581
€24.16 (RRP inc. VAT)
#DY107601 - LIMITED EDITION - REAMER FOR BODY + ALU COVER - SMALL
LIMITED EDITION - REAMER FOR BODY + ALU COVER - SMALL DY107601
€37.44 (RRP inc. VAT)
#DY107602 - LIMITED EDITION - REAMER FOR BODY + COVER - LARGE
LIMITED EDITION - REAMER FOR BODY + COVER - LARGE DY107602
€56.16 (RRP inc. VAT)
#DY107606 - CUTTING HEAD FOR REAMER
CUTTING HEAD FOR REAMER DY107606
€46.80 (RRP inc. VAT)
#DY107607 - SMALL CUTTING HEAD FOR REAMER
SMALL CUTTING HEAD FOR REAMER DY107607
€28.26 (RRP inc. VAT)
#DY107611 - REPL. TIP EXHAUST SPRING / CASTER CLIP REMOVER
REPL. TIP EXHAUST SPRING / CASTER CLIP REMOVER DY107611
€10.58 (RRP inc. VAT)
#DY107615 - HUDY CAMBER TOOL 1/8 ON-ROAD
HUDY CAMBER TOOL 1/8 ON-ROAD DY107615
€22.63 (RRP inc. VAT)
#DY107622 - ARM REAMER REPLACEMENT TIP # 3.5x120MM
ARM REAMER REPLACEMENT TIP # 3.5x120MM DY107622
€14.69 (RRP inc. VAT)
#DY107623 - ARM REAMER REPLACEMENT TIP # 3.0x120MM
ARM REAMER REPLACEMENT TIP # 3.0x120MM DY107623
€14.69 (RRP inc. VAT)
#DY107624 - ARM REAMER REPLACEMENT TIP # 4.0x120MM
ARM REAMER REPLACEMENT TIP # 4.0x120MM DY107624
€14.69 (RRP inc. VAT)
#DY107632 - ARM REAMER + REPL. TIP 3.5 x 120 MM
ARM REAMER + REPL. TIP 3.5  x 120 MM DY107632
€18.35 (RRP inc. VAT)
#DY107633 - ARM REAMER + REPL. TIP 3.0 x 120 MM - V2
ARM REAMER + REPL. TIP 3.0  x 120 MM - V2 DY107633
€21.06 (RRP inc. VAT)
#DY107634 - ARM REAMER + REPL. TIP 4.0 x 120 MM - V2
ARM REAMER + REPL. TIP 4.0  x 120 MM - V2 DY107634
€21.06 (RRP inc. VAT)
#DY107642 - LIMITED EDITION - ARM REAMER 3.5 MM
LIMITED EDITION - ARM REAMER 3.5 MM DY107642
€22.66 (RRP inc. VAT)
#DY107680 - HUDY ENGINE C-CLIP REMOVAL TOOL
HUDY ENGINE C-CLIP REMOVAL TOOL DY107680
€22.26 (RRP inc. VAT)
#DY107701 - CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) FOR 1/8 - LW (2)
CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) FOR 1/8 - LW (2) DY107701
€27.61 (RRP inc. VAT)
#DY107702 - CHASSIS DROOP GAUGE SUPPORT BLOCKS (10 MM) FOR 1/10 (2)
CHASSIS DROOP GAUGE SUPPORT BLOCKS (10 MM) FOR 1/10 (2) DY107702
€18.07 (RRP inc. VAT)
#DY107712 - CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 CARS (10 MM)
CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 CARS (10 MM) DY107712
€17.03 (RRP inc. VAT)
#DY107713 - CHASSIS RIDE HEIGHT GAUGE 2.0 MM TO 15.0 MM (STEPPED)
CHASSIS RIDE HEIGHT GAUGE 2.0 MM TO 15.0 MM (STEPPED) DY107713
€26.96 (RRP inc. VAT)
#DY107714 - ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM
ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM DY107714
€19.84 (RRP inc. VAT)
#DY107715 - CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED)
CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED) DY107715
€21.24 (RRP inc. VAT)
#DY107716 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE
ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE DY107716
€24.34 (RRP inc. VAT)
#DY107717 - CHASSIS DROOP GAUGE 0 TO -13 MM FOR 1/8 OFF-ROAD & TRUGGY
CHASSIS DROOP GAUGE 0 TO -13 MM FOR 1/8 OFF-ROAD & TRUGGY DY107717
€20.98 (RRP inc. VAT)
#DY107718 - RIDE HEIGHT GAUGE STEPPED 1/10 & 1/12 PAN CARS
RIDE HEIGHT GAUGE STEPPED 1/10 & 1/12 PAN CARS DY107718
€26.50 (RRP inc. VAT)
#DY107719 - QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM
QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM DY107719
€22.09 (RRP inc. VAT)
#DY107720 - CHASSIS RIDE HEIGHT GAUGE 17MM TO 30MM FOR 1/8 & 1/10 OFF-ROAD
CHASSIS RIDE HEIGHT GAUGE 17MM TO 30MM FOR 1/8 & 1/10 OFF-ROAD DY107720
€20.98 (RRP inc. VAT)
#DY107740 - HUDY ADJUSTABLE RIDE HEIGHT GAUGE 14-20MM
HUDY ADJUSTABLE RIDE HEIGHT GAUGE 14-20MM DY107740
€36.04 (RRP inc. VAT)
#DY107742 - HUDY ADJUSTABLE RIDE HEIGHT GAUGE 20-30MM
HUDY ADJUSTABLE RIDE HEIGHT GAUGE 20-30MM DY107742
€36.04 (RRP inc. VAT)
#DY107744 - HUDY ADJUSTABLE RIDE HEIGHT GAUGE 30-45MM
HUDY ADJUSTABLE RIDE HEIGHT GAUGE 30-45MM DY107744
€36.04 (RRP inc. VAT)
#DY107750 - HUDY GRAPHITE QUICK CAMBER GAUGE 1/10 TOURING 1.5°; 2°; 2.5°
 DY107750
€15.44 (RRP inc. VAT)
#DY107751 - HUDY QUICK CAMBER GAUGE 1/8 OFF-ROAD 1°; 2°; 3°
 DY107751
€19.84 (RRP inc. VAT)
#DY107762 - HUDY ADJUSTABLE CAMBER GAUGE 110MM
HUDY ADJUSTABLE CAMBER GAUGE 110MM DY107762
€37.37 (RRP inc. VAT)