LOWER SUSPENSION HOLDERS (2+2+2)
Manufacturer: Xray
RC DisCo Part No: XR302044
Good Stock Levels Good Stock
€8.28 (RRP inc. VAT)

Molded composite lower suspension pin holders for use in XRAY T2.

Set of 3 pairs of holders offer three different offsets (0mm, -0.75mm, +0.75mm) for easy adjustment of roll center, front dive, and rear squat.

This Part Fits OnStandard PartOption Part
XR300005 T1FK'05 - 2005Standard part for T1FK'05 - 2005
XR300006 T2 - 2006Standard part for T2 - 2006
XR300008 T2'007 - EU - 2007Standard part for T2'007 - EU - 2007
XR300007 T2'007 - US - 2007Standard part for T2'007 - US - 2007
XR300011 T2'008 - EU - 2008Standard part for T2'008 - EU - 2008
XR300012 T2'008 - US - 2008Standard part for T2'008 - US - 2008
XR300013 T2'009 - EU - 2009Standard part for T2'009 - EU - 2009
XR300014 T2'009 - US - 2009Standard part for T2'009 - US - 2009
XR300101 T2R - 2006Standard part for T2R - 2006
XR300102 T2R PRO - 2009Standard part for T2R PRO - 2009
XR300017 T3 - 2011Standard part for T3 - 2011
XR300018 T3 - 2012Standard part for T3 - 2012
XR300015 T3 - EU - 2010Standard part for T3 - EU - 2010
XR300016 T3 - US - 2010Standard part for T3 - US - 2010
XR300103 T3R - 2010Standard part for T3R - 2010
XR300019 T4 - 2013Standard part for T4 - 2013
T2 - 2006Standard part for T2 - 2006
T2'007 - EU - 2007Standard part for T2'007 - EU - 2007
T2'007 - US - 2007Standard part for T2'007 - US - 2007
T2'008 - EU - 2008Standard part for T2'008 - EU - 2008
T2'008 - US - 2008Standard part for T2'008 - US - 2008
T2R - 2006Standard part for T2R - 2006
LOWER SUSPENSION HOLDERS (2+2+2)
Bookmark and Share
Customers who bought this item, also bought:
#XR302252 - COMPOSITE STEERING BLOCK - MEDIUM - V2
COMPOSITE STEERING BLOCK - MEDIUM - V2
€8.65 (RRP inc. VAT)
#XR303352 - COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - MEDIUM
COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - MEDIUM
€8.65 (RRP inc. VAT)
#XR305135 - COMPOSITE SOLID AXLE DRIVESHAFT ADAPTERS - V2 (2)
COMPOSITE SOLID AXLE DRIVESHAFT ADAPTERS - V2 (2)
€15.47 (RRP inc. VAT)
#XR305241 - DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM (4)
DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM (4)
Login & Backorder
€7.1 (RRP inc. VAT)
#XR302163 - FRONT SUSPENSION ARM - HARD - 1-HOLE
FRONT SUSPENSION ARM - HARD - 1-HOLE
€7 (RRP inc.VAT)
€3.50 (RRP inc. VAT)
#XR302253 - COMPOSITE STEERING BLOCK - HARD - V2
COMPOSITE STEERING BLOCK - HARD - V2
€8.65 (RRP inc. VAT)
#XR305446 - HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 189 MM
HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 189 MM
€18.47 (RRP inc. VAT)
#XR303163 - REAR SUSPENSION ARM - HARD - 1-HOLE - V2
REAR SUSPENSION ARM - HARD - 1-HOLE - V2
€9.04 (RRP inc. VAT)