SHOCK BALL JOINT 21MM (2)
Manufacturer: Xray
RC DisCo Part No: XR328011
Good Stock Levels Good Stock
€5.14 (RRP inc. VAT)

Molded composite shock ball joint, length 21mm. These ball joints are +4mm longer than standard ball joints, allowing greater suspension downtravel. Fits front & rear shock absorbers. Fits XB4 and XB2. Set of 2.

This Part Fits OnStandard PartOption Part
XR320001 XB2 - 2015Optional part for XB2 - 2015
XR320000 XB2 - 2016Optional part for XB2 - 2016
XR320002 XB2 - 2017Optional part for XB2 - 2017
XR320004 XB2 Carpet - 2018Optional part for XB2 Carpet - 2018
XR320006 XB2 Carpet - 2019Optional part for XB2 Carpet - 2019
XR320003 XB2 Dirt - 2017Optional part for XB2 Dirt - 2017
XR320005 XB2 Dirt - 2019Optional part for XB2 Dirt - 2019
XR320200 XT2 - 2017Optional part for XT2 - 2017
XR320201 XT2 - 2018Optional part for XT2 - 2018
XR320202 XT2 Carpet - 2019Optional part for XT2 Carpet - 2019
XR320203 XT2 Dirt - 2019Optional part for XT2 Dirt - 2019
SHOCK BALL JOINT 21MM (2)
SHOCK BALL JOINT 21MM (2)
Bookmark and Share
Customers who bought this item, also bought:
#XR372503 - COMPOSITE SERVO SAVER - X-STIFF - SET - V2
COMPOSITE SERVO SAVER - X-STIFF - SET - V2
€20.22 (RRP inc. VAT)
#XR302665 - COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4)
COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4)
€7.98 (RRP inc. VAT)
#XR302253 - COMPOSITE STEERING BLOCK - HARD - V2
COMPOSITE STEERING BLOCK - HARD - V2
€8.65 (RRP inc. VAT)
#XR365881 - COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48
COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48
€8.77 (RRP inc. VAT)
#XR303354 - COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - HARD
COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - HARD
€8.65 (RRP inc. VAT)
#XR369903 - 4WD/2WD REAR WHEEL AERODISK WITH 12MM HEX - WHITE (10) --- Replaced with #329901
4WD/2WD REAR WHEEL AERODISK WITH 12MM HEX - WHITE (10) --- Replaced with #329901
€26.84 (RRP inc. VAT)
#XR362112-H - COMPOSITE SUSPENSION ARM FRONT LOWER - HARD
COMPOSITE SUSPENSION ARM FRONT LOWER - HARD
€9.7 (RRP inc. VAT)
#XR362652 - BALL END 4.9MM WITH THREAD 10MM (2)
BALL END 4.9MM WITH THREAD 10MM (2)
€9.29 (RRP inc. VAT)