Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (2), Ball bearing (13), Clip (7), Cone Washer (1), Hex (39), Nut (3), Phillips (4), Pin (6), Set (2), Shim (5), Washer (8)
Keyword:
Antenna / Transponder (2), Anti-roll bar (36), Axle (15), Ball joint (27), battery (1), Bearing (19), Belt (4), Bevel gear (7), Body mount parts (10), Body post (5), Brake (9), Bulkhead (8), Bumper (7), C-Hub (33), Chassis (6), Clip (9), Clutch (18), CVD (14), deck (8), Diff (45), Drive shaft (32), Drive shaft - CVD (8), Drive shaft - ECS (5), Engine mount (6), Exhaust (3), Flywheel (4), Fuel Tank / tube (4), Hex (42), Impact (1), Layshaft (2), M3 (4), M4 (6), O-ring (9), Pin (40), Pinion gear (8), Pivot Ball (8), Pivot Pin (14), Pulley (6), Radio plate / RX box (2), Rear hub (7), Rear Wing (4), Servo (10), Servo Horn (1), Servo horn / mount (4), Servo saver (5), shaft (37), Shim (31), Shock parts (35), Shock tower (6), Soft (6), Spring (71), Spur gear (19), Steering block (17), Steering plate (4), Suspension arm (8), Suspension holder (26), Turnbuckle (16), Upper/Top Deck (5), Upright (6), Wheel hub (6)
Thread Size:
M2 (2mm) (1), M3 (3mm) (30), M4 (4mm) (10), M5 (5mm) (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR308031-K - ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4)
ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4) XR308031-K
€24.48 (RRP inc. VAT)
#XR308031-O - ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4)
ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4) XR308031-O
€24.48 (RRP inc. VAT)
#XR308036 - COMPOSITE NON-ADJUSTABLE PISTONS - DELRIN - V3
COMPOSITE NON-ADJUSTABLE PISTONS - DELRIN - V3 XR308036
€10.58 (RRP inc. VAT)
#XR308080 - SHOCK ABSORBER MEMBRANE (4)
SHOCK ABSORBER MEMBRANE  (4) XR308080
€12.32 (RRP inc. VAT)
#XR308081 - SHOCK ABSORBER MEMBRANE - LOW (4)
SHOCK ABSORBER MEMBRANE - LOW  (4) XR308081
€12.32 (RRP inc. VAT)
#XR308090 - SHOCK FOAM INSERTS (4)
SHOCK FOAM INSERTS (4) XR308090
€7.98 (RRP inc. VAT)
#XR308091 - SHOCK FOAM INSERTS - LOW (4)
SHOCK FOAM INSERTS - LOW (4) XR308091
€7.98 (RRP inc. VAT)
#XR308302 - XRAY SHOCK ABSORBER-SET 4-STEP - SHORT (2)
XRAY SHOCK ABSORBER-SET 4-STEP - SHORT (2) XR308302
€43.69 (RRP inc. VAT)
#XR308315 - SHOCK BALL JOINT - LONG (4)
SHOCK BALL JOINT - LONG (4) XR308315
€8.65 (RRP inc. VAT)
#XR308316 - SHOCK BALL JOINT - OPEN (4)
SHOCK BALL JOINT - OPEN (4) XR308316
€7.98 (RRP inc. VAT)
#XR308330 - COMPOSITE FRAME SHOCK PARTS 4-STEP - V2
COMPOSITE FRAME SHOCK PARTS 4-STEP - V2 XR308330
€10.75 (RRP inc. VAT)
#XR308332 - COMPOSITE SHOCK PARTS - REBOUND HOLE - SHORT
COMPOSITE SHOCK PARTS - REBOUND HOLE - SHORT XR308332
€11.14 (RRP inc. VAT)
#XR308352 - ALU SHOCK CAP-NUT WITH VENT HOLE (2)
ALU SHOCK CAP-NUT WITH VENT HOLE (2) XR308352
€7.00 (RRP inc. VAT)
#XR308373 - XRAY SPRING-SET C=2.2 (2)
XRAY SPRING-SET C=2.2 (2) XR308373
€12.32 (RRP inc. VAT)
#XR308375 - XRAY SPRING-SET C=2.6 (2)
XRAY SPRING-SET C=2.6 (2) XR308375
€12.32 (RRP inc. VAT)
#XR308376 - XRAY SPRING-SET C=2.8 (2)
XRAY SPRING-SET C=2.8 (2) XR308376
€12.32 (RRP inc. VAT)
#XR308377 - XRAY SPRING-SET C=3.0 (2)
XRAY SPRING-SET C=3.0 (2) XR308377
€12.32 (RRP inc. VAT)
#XR308378 - XRAY SPRING-SET C=3.2 (2)
XRAY SPRING-SET C=3.2 (2) XR308378
€12.32 (RRP inc. VAT)
#XR308379 - XRAY SPRING-SET C=3.4 (2)
XRAY SPRING-SET C=3.4 (2) XR308379
€12.32 (RRP inc. VAT)
#XR308386 - XRAY SPRING-SET D=1.7 (25 LB) C=3.6 BLACK (4)
XRAY SPRING-SET D=1.7 (25 LB) C=3.6 BLACK (4) XR308386
€20.17 (RRP inc. VAT)
#XR308387 - XRAY SPRING-SET D=1.8 (30 LB) C=4.5 BLACK (4)
XRAY SPRING-SET D=1.8 (30 LB) C=4.5 BLACK (4) XR308387
€20.17 (RRP inc. VAT)
#XR308397 - XRAY SPRING-SET D=1.8 (33 LB) PURPLE - MEDIUM-HARD (4) --- Replaced with #348283
XRAY SPRING-SET D=1.8 (33 LB) PURPLE - MEDIUM-HARD (4) --- Replaced with #348283 XR308397
€15.28 (RRP inc. VAT)
#XR309000 - T2, T3 SET OF HIGH-SPEED BALL-BEARINGS (18)
T2, T3 SET OF HIGH-SPEED BALL-BEARINGS (18) XR309000
€30.98 (RRP inc. VAT)
#XR309002 - SET OF CERAMIC BALL-BEARINGS (14)
SET OF CERAMIC BALL-BEARINGS (14) XR309002
€190.98 (RRP inc. VAT)
#XR309301 - MOUNTING HARDWARE PACKAGE - SET
MOUNTING HARDWARE PACKAGE - SET XR309301
€18.02 (RRP inc. VAT)
#XR309400 - BODY CLIP (8)
BODY CLIP (8) XR309400
€6.79 (RRP inc. VAT)
#XR309402 - BODY CLIP FOR 6MM BODY POST (4)
BODY CLIP FOR 6MM BODY POST (4) XR309402
€6.79 (RRP inc. VAT)
#XR333450 - ANTI-ROLL BAR PIVOT BALL 5.8 MM (2)
ANTI-ROLL BAR PIVOT BALL 5.8 MM (2) XR333450
€6.30 (RRP inc. VAT)
#XR333451 - ALU ANTI-ROLL BAR PIVOT BALL 5.8 MM - SWISS 7075 T6 - HARD COATED (2)
ALU ANTI-ROLL BAR PIVOT BALL 5.8 MM - SWISS 7075 T6 - HARD COATED (2) XR333451
€10.46 (RRP inc. VAT)
#XR338286 - XRAY SPRING-SET C=3.6 - SOFT-MEDIUM - REAR (2)
XRAY SPRING-SET C=3.6 - SOFT-MEDIUM - REAR (2) XR338286
€10.75 (RRP inc. VAT)
#XR338287 - XRAY SPRING-SET C=4.5 - MEDIUM-MEDIUM-HARD - REAR (2)
XRAY SPRING-SET C=4.5 - MEDIUM-MEDIUM-HARD - REAR  (2) XR338287
€10.75 (RRP inc. VAT)
#XR338296 - XRAY SPRING-SET C=4.0 - MEDIUM - REAR (2)
XRAY SPRING-SET C=4.0 - MEDIUM - REAR (2) XR338296
€10.75 (RRP inc. VAT)
#XR338297 - XRAY SPRING-SET C=5.0 - MEDIUM-HARD - REAR (2)
XRAY SPRING-SET C=5.0 - MEDIUM-HARD - REAR (2) XR338297
€10.75 (RRP inc. VAT)
#XR351101 - ALU CHASSIS - HARD COATED SWISS 7075 T6 (3MM) - V2
ALU CHASSIS - HARD COATED SWISS 7075 T6 (3MM) - V2 XR351101
€122.68 (RRP inc. VAT)
#XR351151 - XB808 CHASSIS SIDE GUARD L+R
XB808 CHASSIS SIDE GUARD L+R XR351151
€13.87 (RRP inc. VAT)
#XR351200 - FRONT & REAR BUMPER - V2
FRONT & REAR BUMPER - V2 XR351200
€9.29 (RRP inc. VAT)
#XR351300 - BODY POSTS
BODY POSTS XR351300
€4.32 (RRP inc. VAT)
#XR351301 - BODY POSTS
BODY POSTS XR351301
€5.22 (RRP inc. VAT)
#XR351330 - COMPOSITE REAR BODY POST - LONG
COMPOSITE REAR BODY POST - LONG XR351330
€5.22 (RRP inc. VAT)
#XR351340 - GRAPHITE UPPER PLATE - V2
GRAPHITE UPPER PLATE - V2 XR351340
€19.07 (RRP inc. VAT)
#XR351343 - XB9 GRAPHITE UPPER PLATE
XB9 GRAPHITE UPPER PLATE XR351343
€30.98 (RRP inc. VAT)
#XR351345 - ALU UPPER PLATE 7075 T6 (4MM)
ALU UPPER PLATE 7075 T6 (4MM) XR351345
€40.92 (RRP inc. VAT)
#XR351349 - XB808 COMPOSITE UPPER PLATE
XB808 COMPOSITE UPPER PLATE XR351349
€5.22 (RRP inc. VAT)
#XR352001 - DIFF BULKHEAD BLOCK SET REAR
DIFF BULKHEAD BLOCK SET REAR XR352001
€12.68 (RRP inc. VAT)
#XR352003 - XB808 DIFF BULKHEAD BLOCK SET F/R WITH DUST COVERS
XB808 DIFF BULKHEAD BLOCK SET F/R WITH DUST COVERS XR352003
€18.47 (RRP inc. VAT)
#XR352070 - COMPOSITE BEARING HUB FOR DIFF (4)
COMPOSITE BEARING HUB FOR DIFF (4) XR352070
€6.02 (RRP inc. VAT)
#XR352076 - XB808 ALU BEARING COLLAR FOR 13x20 DIFF BEARINGS (2)
XB808 ALU BEARING COLLAR FOR 13x20 DIFF BEARINGS (2) XR352076
€10.75 (RRP inc. VAT)
#XR352077 - XB808 ALU BEARING COLLAR FOR 3 DIFF BEARINGS (2)
XB808 ALU BEARING COLLAR FOR 3 DIFF BEARINGS (2) XR352077
€10.75 (RRP inc. VAT)
#XR352080 - FRONT TORQUE ROD SET
FRONT TORQUE ROD SET XR352080
€7.34 (RRP inc. VAT)
#XR352089 - COMPOSITE FRONT BRACE - V2
COMPOSITE FRONT BRACE - V2 XR352089
€9.29 (RRP inc. VAT)
#XR352150 - FRONT UPPER ARM BALL JOINT (2)
FRONT UPPER ARM BALL JOINT (2) XR352150
€6.02 (RRP inc. VAT)
#XR352151 - XB808 FRONT UPPER ARM BALL JOINT (2) - V2
XB808 FRONT UPPER ARM BALL JOINT (2) - V2 XR352151
€6.26 (RRP inc. VAT)
#XR352152 - COMPOSITE FRONT UPPER ARM BALL JOINT - EXTRA CUT (2)
COMPOSITE FRONT UPPER ARM BALL JOINT - EXTRA CUT (2) XR352152
€10.75 (RRP inc. VAT)
#XR352170 - STEEL ECCENTRIC BUSHING 0° (2)
STEEL ECCENTRIC BUSHING 0°  (2) XR352170
€9.04 (RRP inc. VAT)
#XR352174 - STEEL ECCENTRIC BUSHING 1° - V2 (2)
STEEL ECCENTRIC BUSHING 1° - V2 (2) XR352174
€17.93 (RRP inc. VAT)
#XR352175 - STEEL ECCENTRIC BUSHING 2° - V2 (2)
STEEL ECCENTRIC BUSHING 2° - V2 (2) XR352175
€17.93 (RRP inc. VAT)
#XR352179 - COMPOSITE BUSHING & BALL MOUNT SET (2+2)
COMPOSITE BUSHING & BALL MOUNT SET (2+2) XR352179
€4.32 (RRP inc. VAT)
#XR352180 - STEEL BALL MOUNT (2)
STEEL BALL MOUNT (2) XR352180
€7.34 (RRP inc. VAT)
#XR352181 - XB808 STEEL ARM BUSHING (2)
XB808 STEEL ARM BUSHING (2) XR352181
€7.34 (RRP inc. VAT)
#XR352191 - XB9 GRAPHITE FRONT LOWER ARM PLATE 1.6 MM (2)
25%
OFF
XB9 GRAPHITE FRONT LOWER ARM PLATE 1.6 MM (2) XR352191
€33.05 (RRP inc.VAT)
€24.79 (RRP inc. VAT)
#XR352210 - C-HUB RIGHT
C-HUB RIGHT XR352210
€6.02 (RRP inc. VAT)
#XR352212 - XB808 COMPOSITE CASTER BLOCK 10° RIGHT
XB808 COMPOSITE CASTER BLOCK 10° RIGHT XR352212
€9.29 (RRP inc. VAT)
#XR352214 - XB808 COMPOSITE CASTER BLOCK 14° RIGHT - HAND MODIFIED
XB808 COMPOSITE CASTER BLOCK 14° RIGHT - HAND MODIFIED XR352214
€17.04 (RRP inc. VAT)
#XR352215 - XB9 COMPOSITE 2-HOLE CASTER BLOCK 16° RIGHT
XB9 COMPOSITE 2-HOLE CASTER BLOCK 16° RIGHT XR352215
€17.04 (RRP inc. VAT)
#XR352218 - XB808 ALU CASTER BLOCK 14° RIGHT - SWISS 7075 T6 - HARD COATED --- Replaced with #352274
40%
OFF
 XR352218
€40.54 (RRP inc.VAT)
€24.32 (RRP inc. VAT)
#XR352220 - C-HUB LEFT
C-HUB LEFT XR352220
€6.02 (RRP inc. VAT)
#XR352222 - XB808 COMPOSITE CASTER BLOCK 10° LEFT
XB808 COMPOSITE CASTER BLOCK 10° LEFT XR352222
€9.29 (RRP inc. VAT)
#XR352223 - XB808 COMPOSITE CASTER BLOCK 12° LEFT - HAND MODIFIED
XB808 COMPOSITE CASTER BLOCK 12° LEFT - HAND MODIFIED XR352223
€17.04 (RRP inc. VAT)
#XR352224 - XB808 COMPOSITE CASTER BLOCK 14° LEFT - HAND MODIFIED
XB808 COMPOSITE CASTER BLOCK 14° LEFT - HAND MODIFIED XR352224
€17.04 (RRP inc. VAT)
#XR352225 - XB9 COMPOSITE 2-HOLE CASTER BLOCK 16° LEFT
XB9 COMPOSITE 2-HOLE CASTER BLOCK 16° LEFT XR352225
€17.04 (RRP inc. VAT)
#XR352250 - STEERING BLOCK RIGHT - V2
STEERING BLOCK RIGHT - V2 XR352250
€18.07 (RRP inc. VAT)
#XR352253 - XB9 COMPOSITE STEERING BLOCK RIGHT - MOULDED-IN ALU BUSHING
XB9 COMPOSITE STEERING BLOCK RIGHT - MOULDED-IN ALU BUSHING XR352253
€17.04 (RRP inc. VAT)
#XR352257 - XB808 ALU STEERING BLOCK RIGHT - 5° KINGPIN - SET
XB808 ALU STEERING BLOCK RIGHT - 5° KINGPIN - SET XR352257
€54.50 (RRP inc. VAT)
#XR352258 - ALU STEERING BLOCK RIGHT - 10° KINGPIN - SET
ALU STEERING BLOCK RIGHT - 10° KINGPIN - SET XR352258
€54.50 (RRP inc. VAT)
#XR352260 - STEERING BLOCK LEFT - V2
STEERING BLOCK LEFT - V2 XR352260
€18.07 (RRP inc. VAT)
#XR352262 - XB808 COMPOSITE STEERING BLOCK LEFT - MOULDED-IN STEEL BUSHING
XB808 COMPOSITE STEERING BLOCK LEFT - MOULDED-IN STEEL BUSHING XR352262
€10.75 (RRP inc. VAT)
#XR352263 - XB9 COMPOSITE STEERING BLOCK LEFT - MOULDED-IN ALU BUSHING
XB9 COMPOSITE STEERING BLOCK LEFT - MOULDED-IN ALU BUSHING XR352263
€17.04 (RRP inc. VAT)
#XR352266 - XB808 ALU STEERING BLOCK LEFT - SWISS 7075 T6 - HARD COATED - SET - V2
XB808 ALU STEERING BLOCK LEFT  - SWISS 7075 T6 - HARD COATED - SET - V2 XR352266
€54.50 (RRP inc. VAT)
#XR352267 - XB808 ALU STEERING BLOCK LEFT - 5° KINGPIN - SET
XB808 ALU STEERING BLOCK LEFT - 5° KINGPIN - SET XR352267
€54.50 (RRP inc. VAT)
#XR352270 - ALU CASTER BLOCK 10° RIGHT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED
ALU CASTER BLOCK 10° RIGHT  - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED XR352270
€54.50 (RRP inc. VAT)
#XR352272 - ALU CASTER BLOCK 12° RIGHT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED
ALU CASTER BLOCK 12° RIGHT  - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED XR352272
€54.50 (RRP inc. VAT)
#XR352274 - ALU CASTER BLOCK 14° RIGHT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED
ALU CASTER BLOCK 14° RIGHT  - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED XR352274
€54.50 (RRP inc. VAT)
#XR352280 - ALU CASTER BLOCK 10° LEFT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED
ALU CASTER BLOCK 10° LEFT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED XR352280
€54.50 (RRP inc. VAT)
#XR352282 - ALU CASTER BLOCK 12° LEFT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED
ALU CASTER BLOCK 12° LEFT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED XR352282
€54.50 (RRP inc. VAT)
#XR352284 - ALU CASTER BLOCK 14° LEFT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED
ALU CASTER BLOCK 14° LEFT - 3 ROLL-CENTERS - SWISS 7075 T6 - HARD COATED XR352284
€54.50 (RRP inc. VAT)
#XR352291 - COMPOSITE BUSHING FOR XB808 ALU STEERING BLOCK (1+1)
COMPOSITE BUSHING FOR XB808 ALU STEERING BLOCK (1+1) XR352291
€6.02 (RRP inc. VAT)
#XR352294 - COMPOSITE BUSHING FOR ALU CASTER BLOCK (2)
COMPOSITE BUSHING FOR ALU CASTER BLOCK (2) XR352294
€6.02 (RRP inc. VAT)
#XR352295 - STEEL STEERING BUSHING (2+2)
STEEL STEERING BUSHING (2+2) XR352295
€15.06 (RRP inc. VAT)
#XR352297 - STEEL STEERING BUSHING - LONG (2+2)
STEEL STEERING BUSHING - LONG (2+2) XR352297
€17.04 (RRP inc. VAT)
#XR352299 - XB808 STEEL STEERING BUSHING (2)
XB808 STEEL STEERING BUSHING (2) XR352299
€7.72 (RRP inc. VAT)
#XR352302 - XB808 COMPOSITE FRONT LOWER SUSP. HOLDERS SET
XB808 COMPOSITE FRONT LOWER SUSP. HOLDERS SET XR352302
€7.34 (RRP inc. VAT)
#XR352309 - COMPOSITE LOWER SUSP. HOLDERS SET
COMPOSITE LOWER SUSP. HOLDERS SET XR352309
€14.14 (RRP inc. VAT)
#XR352310 - ALU FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM)
ALU FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM) XR352310
€25.88 (RRP inc. VAT)
#XR352311 - ALU TQ FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (7MM)
ALU TQ FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (7MM) XR352311
€25.88 (RRP inc. VAT)
#XR352313 - XB808 ALU FRONT LOWER SUSP. HOLDER - FRONT - SWISS 7075 T6 (7MM) - HARD COATED
XB808 ALU FRONT LOWER SUSP. HOLDER - FRONT - SWISS 7075 T6 (7MM) - HARD COATED XR352313
€27.28 (RRP inc. VAT)
#XR352314 - COMPOSITE SQUARE ADJ. ROLL-CENTER BUSHINGS - V2 (2)
COMPOSITE SQUARE ADJ. ROLL-CENTER BUSHINGS - V2 (2) XR352314
€10.58 (RRP inc. VAT)
#XR352317 - XB808 STEEL SUSP. HOLDER - FRONT - LASER CUT - HARDENED
XB808 STEEL SUSP. HOLDER - FRONT - LASER CUT - HARDENED XR352317
€9.29 (RRP inc. VAT)
#XR352318 - STEEL SUSP. HOLDER - FRONT - LASER CUT
STEEL SUSP. HOLDER - FRONT - LASER CUT XR352318
€7.34 (RRP inc. VAT)
#XR352320 - ALU FRONT LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
ALU FRONT LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM) XR352320
€25.88 (RRP inc. VAT)
#XR352323 - ALU FRONT LOWER SUSP. HOLDER - FRONT - FF - SWISS 7075 T6 - V2
ALU FRONT LOWER SUSP. HOLDER - FRONT - FF - SWISS 7075 T6 - V2 XR352323
€40.92 (RRP inc. VAT)
Show per Page: 12, 20, 40, 100, 200
3